Branchennachrichten

Type 1 vs Type 1+2 vs Type 2 vs Type 3 DC SPD — Which to Choose

A practical guide to choosing Type 1, 1+2, 2 and 3 DC SPDs for solar, battery and EV systems, based on IEC 61643-31 and installation risk.

SPD Company Selection Guide for Global Electrical Buyers

A six-step selection process that helps global electrical buyers shortlist a reliable SPD company by certifications, SPD type, manufacturing capability, lead time, and total cost of ownership.

1500V vs 1000V DC SPD: Should You Upgrade Your PV System?

1500V PV systems cut balance-of-system costs, but they change what your DC surge protector must survive. Compare Ucpv, Up, and impulse withstand margins before you upgrade.

SPD Factory Audit Checklist: 9 Checks Before You Buy

How do you audit an SPD factory before you buy? Use this 9-check audit checklist covering type-test reports, MOV sourcing, QC records and lab capability.

Wind Turbine surge protection: How to choose the right SPD for wind power systems

This guide explains how to choose the right SPD for wind turbine and wind power systems. It covers Type 1, Type 2, and Type 1+2 surge protectors, key 690V parameters such as Uc, In, Imax, Up, and the best installation locations for wind farm electrical protection.

Electrical SPD for Solar PV Systems: Do You Really Need It?

Solar PV systems face real surge risks from lightning and switching events. This guide explains why a dedicated electrical SPD - your solar surge protection device - is essential, and how to select the right PV surge protection device for residential, commercial, and industrial arrays.

SPD Surge Protective Device Protection For Critical Electrical Loads

This B2B guide explains how SPD surge protective devices shield critical electrical loads across data centers, industrial plants, healthcare, and renewable energy systems. It compares Type 1, Type 2, and Type 3 SPDs and provides a practical checklist for choosing reliable surge protective device suppliers.

How Long Do Industrial Surge Protectors Last? Lifespan And Replacement Guide

This guide explains the real-world lifespan of industrial surge protective devices (SPDs), the factors that accelerate aging, the warning signs of end-of-life, testing and maintenance best practices, replacement timing, and total cost considerations. It also shows how to choose a reliable SPD company and compares industrial SPDs with standard consumer surge protectors. Written for plant engineers, facilities managers, and electrical contractors sourcing B2B surge protection solutions.

Single Phase Surge Protection: 1P vs 1P+N vs 2P Compared

Single phase surge protection is supplied in three pole configurations, and choosing between them decides whether the neutral conductor is protected at all. This comparison examines 1P, 1P+N and 2P devices side by side. A 1P device protects the line conductor to earth only, making it the simplest and narrowest option. A 1P+N device adds neutral to earth protection through a dedicated spark gap stage alongside line to neutral protection. A 2P device provides full protection across both line and neutral conductors. The article compares all three by the protection modes they actually cover, contrasting line to earth, line to neutral and neutral to earth paths so the practical difference becomes clear rather than theoretical, and closes with the questions installers most often ask.