Caratteristiche del prodotto:
| Specifica | BRRL-SC-VG | BRRL-SC-NG | BRRL-SC-TT | |
| SPD classification according to EN61643-11 | Type 2 + Type 3 | Type 2 + Type 3 | Type 2 + Type 3 | |
| SPD classification according to IEC61643-11 | Class II + Class III | Class II + Class III | Class II + Class III | |
| Nominal a.c. voltage | Un | 230V | 230V | 230V |
| Max. continuous operating a.c. voltage | Uc | 275V | 275V | 275V |
| Frequency | 50-60Hz | 50-60Hz | 50-60Hz | |
| Norminal discharge current (8/20μs) | In | 5kA | 5kA | 5kA |
| Maximum discharge current (8/20μs) | Imax | 20kA | 20kA | 20kA |
| Nominal current | IL | 15A | 15A | 15A |
| Livello di protezione della tensione | Su | ≤1.3kV | ≤1.3kV | ≤1.3kV |
| Combined impulse | Uoc | 10KV | 10KV | 10KV |
| Tempo di risposta | tA | ≤100ns | ≤100ns | ≤100ns |
| Intervallo di temperatura operativa | Tu | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ |
| Indicazione dello stato operativo/guasto | green light on: OK; green light off: replace | |||
| Materiale della custodia | Termoplastico UL94-V0 | |||
| Grado di protezione | IP65 | IP65 | IP65 | |
| Codice ordine | B6014 | B6015 | B6016 | |
Caratteristiche:
Up to IP65 rated enclosure for wet locations, high temperature / flameproof enclosure (80°C max surface rating).
Belongs to Class II+III SPD
Available in series use
The max. discharge current is 20kA/line.
Having a very low protection level of below 1.3Kv
LED status indicator
This arrestor fulfills the requirements for type 2+3 protective devices according to the current EN 61643-11 product norm.
Small construction size
Applicazione:
Protect vulnerable equipment against the adverse effects produced by voltage spikes.
Protect LED lighting and the LED driver.
Suitable for LED Lighting, Roadway lighting, Traffic lighting, Digital signage, Wash wall lighting, Parking garage/lot lighting, Flood lighting, Tunnel lighting, Street lighting etc.
The surge protection device is also suitable for the protection of very sensitive components.
Notice:
After installing, the cable shall not be placed under direct sunlight to avoid expediting aging of the insulating
Ulteriori informazioni o una consulenza personale? I nostri prodotti e il nostro know-how sono lì per fornire soluzioni.