Karakteristik produk:
| Spesifikasi | BRPV3-600-12.5 | |
| SPD classification according to EN61643-31 / IEC61643-31 | Type 1 + Type 2 / Class I + Class II | |
| Max. continuous operating d.c. voltage | Ucpv | 600V |
| Arus impuls petir (10/350μs) | Imp | 12,5kA |
| Arus pelepasan nominal (8/20μs) | Di dalam | 25kA |
| Maks. arus pelepasan (8/20μs) | maksimal | 60kA |
| Voltage protection level [(DC+/DC-)→PE] | Ke atas | ≤2.1kV |
| Waktu respons | ta | ≤25ns |
| Kisaran suhu pengoperasian | kamu | -40℃-80℃ |
| Operating state / fault indication | green / red | |
| Luas penampang (Min.) | 4mm² | |
| Luas penampang (Maks.) | 35mm² | |
| Untuk pemasangan | Rel Din 35mm | |
| Bahan penutup | Termoplastik UL94-V0 | |
| Tingkat perlindungan | IP20 | |
| Order code | B18024 | |
| Order code (with remote signal) | B18025 |
Fitur:
Type 1+2 surge protector for photovoltaic.
Lightning impulse current(10/350us):12.5kA.
Max. continuous operating dc voltage:600V DC.
Protection modes: (+) → PE, (-) → PE, (+) → (-).
Remote signaling selectable.
Conform to IEC61643-31 and EN61643-31.
Aplikasi:
For use in photovoltaic power supply systems up to 600 V d.c.
For photovoltaic systems on/on buildings with external lightning protection
Protect against lightning surge voltages in photovoltaic power supply network.
Available as type 1 and type 2 combined lightning current and surge arresters as well as type 2 only surge arrester protective devices.
Installation instruction:
Mount the SPD on 35 mm DIN rail.
DC surge arrester are designed to protect equipment connected to DC power supplies from lightning surges.
The SPD is placed in parallel between the energized conductors and ground.
Informasi lebih lanjut atau konsultasi pribadi? Produk dan pengetahuan kami hadir untuk memberikan solusi.
Optimized by Seraphinite Accelerator
