BRPV3-1000-12.5 T1 1000V 12.5kA T1+2 PV Surge Protection Device

Keterangan

Karakteristik produk:

Spesifikasi		BRPV3-1000-12.5
SPD classification according to EN61643-31 / IEC61643-31		Type 1 + Type 2 / Class I + Class II
Max. continuous operating d.c. voltage	Ucpv	1200V
Arus impuls petir (10/350μs)	Imp	12,5kA
Arus pelepasan nominal (8/20μs)	Di dalam	25kA
Maks. arus pelepasan (8/20μs)	maksimal	60kA
Voltage protection level [(DC+/DC-)→PE]	Ke atas	≤3.8kV
Waktu respons	ta	≤25ns
Kisaran suhu pengoperasian	kamu	-40℃-80℃
Operating state / fault indication		green / red
Luas penampang (Min.)		4mm²
Luas penampang (Maks.)		35mm²
Untuk pemasangan		Rel Din 35mm
Bahan penutup		Termoplastik UL94-V0
Tingkat perlindungan		IP20
Order code		B18020
Order code (with remote signal)		B18021

Fitur:

Status indication.

Ucpv 1000V can be achieved.

Category: Class I + Class II / Type 1 + Type 2.

Protection modes: (+) → PE, (-) → PE, (+) → (-).

Location of use: Photovoltaic systems – PV module side.

Conform to IEC61643-31 and EN61643-31.

Aplikasi:

Surge protection device for the protection of photovoltaic systems from direct and indirect lightning discharge.

For photovoltaic systems on/on buildings with external lightning protection

Available for photovoltaic applications with a generator voltage of up to 1000 V.

Available as type 1 and type 2 combined lightning current and surge arresters as well as type 2 only surge arrester protective devices.

Installation instruction:

These units must be installed in parallel on the DC networks to be protected and provide common mode protection. These protectors are recommended when a direct lightning strike is possible on the installation.

DC surge arrester are designed to protect equipment connected to DC power supplies from lightning surges.

This dc surge protection is specially designed for photo-voltaic applications.

KAMI DI SINI UNTUK MENDUKUNG ANDA!

Informasi lebih lanjut atau konsultasi pribadi? Produk dan pengetahuan kami hadir untuk memberikan solusi.