Karakteristik produk:
| Spesifikasi | BR-7M 150 2P | BR-7M 275 2P | BR-7M 320 2P | |
| Klasifikasi SPD menurut EN61643-11 | Tipe 1 + Tipe 2 | Tipe 1 + Tipe 2 | Tipe 1 + Tipe 2 | |
| Klasifikasi SPD menurut IEC61643-11 | Kelas I + Kelas II | Kelas I + Kelas II | Kelas I + Kelas II | |
| Maks. operasi terus menerus a.c. voltase | Uc | 150V(50/60Hz) | 275V(50/60Hz) | 320V(50/60Hz) |
| Arus impuls petir (10/350μs) | Imp | 7kA | 7kA | 7kA |
| Arus pelepasan nominal (8/20μs) | Di dalam | 20kA | 20kA | 20kA |
| Maks. arus pelepasan (8/20μs) | maksimal | 50kA | 50kA | 50kA |
| Energi spesifik | W/R | 12.25kJ/Ω | 12.25kJ/Ω | 12.25kJ/Ω |
| Tingkat perlindungan tegangan | Ke atas | ≤0.8kV | ≤1.3kV | ≤1.5kV |
| Peringkat arus hubung singkat a.c. | Isccr | 25kA rms | 25kA rms | 25kA rms |
| Maks. sekering cadangan | 125A gG | 125A gG | 125A gG | |
| Tahan TOV tegangan lebih sementara | UT(L-N) | 180V/5sec. | 335V/5sec. | 400V/5sec. |
| Temporary overvoltage TOV-safe failure | UT(L-N) | 230V/120 menit. | 440V/120 menit. | 520V/120min. |
| Waktu respons | ta | ≤25ns | ≤25ns | ≤25ns |
| Kisaran suhu pengoperasian | kamu | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ |
| Status pengoperasian/indikasi kesalahan | hijau/merah | hijau/merah | hijau/merah | |
| Luas penampang (Min.) | 4mm² | 4mm² | 4mm² | |
| Luas penampang (Maks.) | 35mm² | 35mm² | 35mm² | |
| Untuk pemasangan | Rel Din 35mm | |||
| Bahan penutup | Termoplastik UL94-V0 | |||
| Tingkat perlindungan | IP20 | IP20 | IP20 | |
| Kode Pesanan | B17312 | B17314 | B17316 | |
| Kode Pesanan (Dengan sinyal jarak jauh) | B17313 | B17315 | B17317 | |
Fitur:
BR-7M high energy modular SPD is designed according to IEC standard.
This model designed in modular with excellent airtight property.
It is with 35mm din rail, which make it easy for installation.
Aplikasi:
It could be installed in 275V/320V AC power system.
This product is especially suitable for application in the A grade Lightning Protection in high risk area of lightning strike.
Instalasi:
The protector is installed with standard 35mm track.
The protector is connected by 4 ~ 35mm copper wire.
No need to adjust after the protector is installed as required.
During operation, regularly check whether the module is red; replace the failed component in time.
Informasi lebih lanjut atau konsultasi pribadi? Produk dan pengetahuan kami hadir untuk memberikan solusi.
Optimized by Seraphinite Accelerator
