Karakteristik produk:
| Spesifikasi | BR-40VG 150 1P | BR-40VG 275 1P | BR-40VG 320 1P | BR-40VG 385 1P | BR-40VG 440 1P | |
| Klasifikasi SPD menurut EN61643-11 | Tipe 2 | Tipe 2 | Tipe 2 | Tipe 2 | Tipe 2 | |
| Klasifikasi SPD menurut IEC61643-11 | Class II | Class II | Class II | Class II | Class II | |
| Maks. operasi terus menerus a.c. voltase | Uc | 150V | 275V | 320V | 385V | 440V |
| Arus pelepasan nominal (8/20μs) | Di dalam | 20kA | 20kA | 20kA | 20kA | 20kA |
| Maks. arus pelepasan (8/20μs) | maksimal | 40kA | 40kA | 40kA | 40kA | 40kA |
| Tingkat perlindungan tegangan | Ke atas | ≤1.3kV | ≤1.3kV | ≤1.5kV | ≤1.8kV | ≤2.0kV |
| Maks. sekering cadangan | 100A gG | 100A gG | 100A gG | 100A gG | 100A gG | |
| Short-circuit withstand capacity | Isccr | 25kA | 25kA | 25kA | 25kA | 25kA |
| Tahan TOV tegangan lebih sementara | UT | 180V/5sec. | 335V/5sec. | 400V/5sec. | 500V/5sec. | 580V/5sec. |
| Temporary overvoltage TOV-safe failure | UT | 230V/120 menit. | 440V/120 menit. | 520V/120min. | 650V/120min. | 765V/120min. |
| Waktu respons | ta | ≤100ns | ≤100ns | ≤100ns | ≤100ns | ≤100ns |
| Kisaran suhu pengoperasian | kamu | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ |
| Status pengoperasian/indikasi kesalahan | hijau/merah | hijau/merah | hijau/merah | hijau/merah | hijau/merah | |
| Luas penampang (Min.) | 4mm² | 4mm² | 4mm² | 4mm² | 4mm² | |
| Luas penampang (Maks.) | 35mm² | 35mm² | 35mm² | 35mm² | 35mm² | |
| Untuk pemasangan | Rel Din 35mm | |||||
| Bahan penutup | Thermoplastic UL94-V0 | |||||
| Tingkat perlindungan | IP20 | IP20 | IP20 | IP20 | IP20 | |
| Kode Pesanan | B17500 | B17512 | B17524 | B17536 | B17548 | |
| Kode Pesanan (Dengan sinyal jarak jauh) | B17501 | B17513 | B17525 | B17537 | B17549 | |
Fitur:
Class II / Type 2 lightning protective device.
In: 20kA.
For using in the lightning protection zones concept at boundary 1-2.
Module design, convenient installation
Low residual voltage and quick response.
Time of response ˂ 100ns
With remote signaling contact for control device.
Protecting low-voltage consumers’ installations against indirect lightning discharges.
Fault indication via red mark in the inspection window.
Power Source : Electric
Plug-in module/base design facilitate replacement of a failed module without the need to remove system wiring etc.
Aplikasi:
Protection of an electrical installation and all electrical and electronic devices connected this installation against destructive overvoltage surges.
Surge arresters cover the protection of home appliances, commercial building equipment, and industrial equipment.
The devices are especially designed to provide complete and effective protection against surges, protecting equipment and property connected to the low voltage network.
Informasi lebih lanjut atau konsultasi pribadi? Produk dan pengetahuan kami hadir untuk memberikan solusi.
Optimized by Seraphinite Accelerator
