Karakteristik produk:
| Spesifikasi | BR-40 690 4P | BR-40 800 4P | BR-40 1000 4P | |
| Klasifikasi SPD menurut EN61643-11 | Tipe 2 | Tipe 2 | Tipe 2 | |
| Klasifikasi SPD menurut IEC61643-11 | Class II | Class II | Class II | |
| Maks. operasi terus menerus a.c. voltase | Uc | 690V | 800V | 1000V |
| Arus pelepasan nominal (8/20μs) | Di dalam | 20kA | 20kA | 20kA |
| Maks. arus pelepasan (8/20μs) | maksimal | 40kA | 40kA | 40kA |
| Tingkat perlindungan tegangan | Ke atas | ≤3.2kV | ≤3.6kV | ≤4.0kV |
| Voltage protection level 5kA | Ke atas | ≤2.3kV | ≤2.8kV | ≤3.3kV |
| Maks. sekering cadangan | 100A gG | 100A gG | 100A gG | |
| Short-circuit withstand capacity | Isccr | 25kA | 25kA | 25kA |
| Tahan TOV tegangan lebih sementara | UT | 800V/5sec. | 1000V/5sec. | 1100V/5sec. |
| Temporary overvoltage TOV-safe failure | UT | 1000V/120min. | 1200V/120min. | 1400V/120min. |
| Waktu respons | ta | ≤25ns | ≤25ns | ≤25ns |
| Kisaran suhu pengoperasian | kamu | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ |
| Status pengoperasian/indikasi kesalahan | hijau/merah | hijau/merah | hijau/merah | |
| Luas penampang (Min.) | 4mm² | 4mm² | 4mm² | |
| Luas penampang (Maks.) | 35mm² | 35mm² | 35mm² | |
| Untuk pemasangan | Rel Din 35mm | |||
| Bahan penutup | Thermoplastic UL94-V0 | |||
| Tingkat perlindungan | IP20 | IP20 | IP20 | |
| Kode Pesanan | B18036 | B7957 | B18052 | |
| Kode Pesanan (Dengan sinyal jarak jauh) | B18037 | B7958 | B18053 | |
Fitur:
BRITEC BR-40 4P AC Protective Arrester SPD is suitably used in the TN-S power supply system of AC.
In: 20kA.
Suitable for system power protection, such as power distribution cabinet, switch cabinet, switch cabinet, AC distribution board, etc.
Protect from indirect lightning impulse and other transient over voltage.
Protection class: Type 2 , Class II.
Low residual voltage and quick response
The reaction time of less than 25 ns.
Uc 690V/800V/1000V
Color of visible window shows operating status, normal green, red fault.
With remote signaling contact for control device.
Patented fast tripping mechanism.
Standard: IEC/EN 6163-11
Consisting of a base part and plug-in protection modules.
Aplikasi:
Designed for installations where direct lightning strike risk is reduced (without LPS or medium risk).
Informasi lebih lanjut atau konsultasi pribadi? Produk dan pengetahuan kami hadir untuk memberikan solusi.
Optimized by Seraphinite Accelerator
