...

BR-20 1+1 Tipe 2 20kA Perangkat Pelindung Lonjakan Gelombang Untuk TT Dan TNS

Dapatkan Penawaran
Keterangan

Karakteristik produk:

Spesifikasi BR-20 150 1+1 BR-20 275 1+1 BR-20 320 1+1 BR-20 385 1+1 BR-20 440 1+1
Klasifikasi SPD menurut EN61643-11 Tipe 2 Tipe 2 Tipe 2 Tipe 2 Tipe 2
Klasifikasi SPD menurut IEC61643-11 Class II Class II Class II Class II Class II
Max. continuous operating a.c. voltage(L-N) Uc 150V 275V 320V 385V 440V
Max. continuous operating a.c. voltage(N-PE) Uc 255V 255V 255V 255V 255V
Arus pelepasan nominal (8/20μs) Di dalam 10kA 10kA 10kA 10kA 10kA
Maks. arus pelepasan (8/20μs) maksimal 20kA 20kA 20kA 20kA 20kA
Voltage protection level (L-N) Ke atas ≤0.8kV ≤1.3kV ≤1.5kV ≤1.8kV ≤2.0kV
Voltage protection level 5kA (L-N) Ke atas ≤0.6kV ≤1kV ≤1.2kV ≤1.3kV ≤1.5kV
Voltage protection level (N-PE) Ke atas ≤1.5kV ≤1.5kV ≤1.5kV ≤1.5kV ≤1.5kV
Maks. sekering cadangan 63A gG 63A gG 63A gG 63A gG 63A gG
Short-circuit withstand capacity Isccr 25kA 25kA 25kA 25kA 25kA
Temporary overvoltage TOV-withstand (L-N) UT 180V/5sec. 335V/5sec. 400V/5sec. 500V/5sec. 580V/5sec.
Temporary overvoltage TOV-safe failure(L-N) UT 230V/120 menit. 440V/120 menit. 520V/120min. 650V/120min. 765V/120min.
Temporary overvoltage TOV-withstand(N-PE) UT 1200V/200ms 1200V/200ms 1200V/200ms 1200V/200ms 1200V/200ms
Response time (L-N) ta ≤25ns ≤25ns ≤25ns ≤25ns ≤25ns
Response time (N-PE) ta ≤100ns ≤100ns ≤100ns ≤100ns ≤100ns
Kisaran suhu pengoperasian kamu -40℃-80℃ -40℃-80℃ -40℃-80℃ -40℃-80℃ -40℃-80℃
Status pengoperasian/indikasi kesalahan hijau/merah hijau/merah hijau/merah hijau/merah hijau/merah
Luas penampang (Min.) 4mm² 4mm² 4mm² 4mm² 4mm²
Luas penampang (Maks.) 35mm² 35mm² 35mm² 35mm² 35mm²
Untuk pemasangan Rel Din 35mm
Bahan penutup Thermoplastic   UL94-V0
Tingkat perlindungan IP20 IP20 IP20 IP20 IP20
Kode Pesanan B18751 B18753 B18755 B18757 B18759
Kode Pesanan (Dengan sinyal jarak jauh) B18752 B18754 B18756 B18758 B18760

Fitur:

20kA Class C for 3 Phase Supply.

It is compact devices designed to protect single-phase+neutral networks at the main switchboard.

The product is complying with the standards: EN 61643-11, CEI 61643-11, UL1449 ed. 4 compliance.

The protection circuitry is based on high energy varistor with thermal disconnection devices.

Easy to operate.

There is an indicator on the cartridges to signal failure mode.

Long service life.

The BR-20 is DIN rail mounted and features replaceable modules for the safest and easiest installation and maintenance.

Excellent functionality

Consistent plug ability(even for N/PE spark gap)

BR-20 series are designed to protect against lighting surge voltages. These units must be installed in parallel on the AC networks to be protected and provide common and differential modes protection.

Thermal disconnect device for each individual connector

Surge Protection Device / Arrester are for protection against switching surges.

With or without floating remote indication contact

Time of response<25ns.

The color of the visible window shows operating status, green means normal, red means abnormal.

Aplikasi:

These devices protect low-voltage consumer systems from over voltages of all types.

Protection of terminal devices.

For using in the zones concept at boundary 1-2.

Used for protection against electrical transients.

 

KAMI DI SINI UNTUK MENDUKUNG ANDA!

Informasi lebih lanjut atau konsultasi pribadi? Produk dan pengetahuan kami hadir untuk memberikan solusi.

PRODUK TERKAIT
BERITA TERKAIT
ANDA MUNGKIN JUGA INGIN MELIHAT
DAPATKAN PERLINDUNGAN Lonjakan
SOLUSI HARI INI!
ikon
ikon
Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.