Karakteristik produk:
| Spesifikasi | BR-12.5M 150 1P+N | BR-12.5M 275 1P+N | BR-12.5M 320 1P+N | |
| Klasifikasi SPD menurut EN61643-11 | Tipe 1 + Tipe 2 | Tipe 1 + Tipe 2 | Tipe 1 + Tipe 2 | |
| Klasifikasi SPD menurut IEC61643-11 | Kelas I + Kelas II | Kelas I + Kelas II | Kelas I + Kelas II | |
| Maks. operasi terus menerus a.c. voltase | Uc(L-N/N-PE) | 150V/255V(50/60Hz) | 275V/255V(50/60Hz) | 320V/255V(50/60Hz) |
| Arus impuls petir (10/350μs) | Iimp(L-N/N-PE) | 12.5kA/25kA | 12.5kA/25kA | 12.5kA/25kA |
| Arus pelepasan nominal (8/20μs) | In(L-N/N-PE) | 25kA/50kA | 25kA/50kA | 25kA/50kA |
| Maks. arus pelepasan (8/20μs) | Imax(L-N/N-PE) | 60kA/100kA | 60kA/100kA | 60kA/100kA |
| Energi spesifik | W/R(L-N/N-PE) | 39kJ/Ω, 156kJ/Ω | 39kJ/Ω, 156kJ/Ω | 339kJ/Ω, 156kJ/Ω |
| Tingkat perlindungan tegangan | Up(L-N/N-PE) | ≤0.8kV/≤1.5kV | ≤1.3kV/≤1.5kV | ≤1.5kV/≤1.5kV |
| Peringkat arus hubung singkat a.c. | Isccr | 25kA rms | 25kA rms | 25kA rms |
| Maks. sekering cadangan | 125A gG | 125A gG | 125A gG | |
| Tahan TOV tegangan lebih sementara | UT(L-N) | 180V/5sec. | 335V/5sec. | 400V/5sec. |
| Temporary overvoltage TOV-safe failure | UT(L-N) | 230V/120 menit. | 440V/120 menit. | 520V/120min. |
| Tahan TOV tegangan lebih sementara | UT(N-PE) | 1200V/200ms | 1200V/200ms | 1200V/200ms |
| Waktu respons | tA(L-N/N-PE) | ≤25ns/≤100ns | ≤25ns/≤100ns | ≤25ns/≤100ns |
| Kisaran suhu pengoperasian | kamu | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ |
| Status pengoperasian/indikasi kesalahan | hijau/merah | hijau/merah | hijau/merah | |
| Luas penampang (Min.) | 4mm² | 4mm² | 4mm² | |
| Luas penampang (Maks.) | 35mm² | 35mm² | 35mm² | |
| Untuk pemasangan | Rel Din 35mm | |||
| Bahan penutup | Termoplastik UL94-V0 | |||
| Tingkat perlindungan | IP20 | IP20 | IP20 | |
| Kode Pesanan | B18617 | B18619 | B18621 | |
| Kode Pesanan (Dengan sinyal jarak jauh) | B18618 | B18620 | B18622 | |
Fitur:
Modular and plug-in arrestor.
Type 1+2 surge arrestor according to EN 61643-11.
Lightning current arresting capacity 12.5 kA (10/350us) per pole.
Operating state / fault indication by green / red indicator flag in the inspection window.
Remote signaling can be selectable.
Universally suitable for TT systems.
Aplikasi:
For general protection of big installations and protection of small installations with external lightning protection.
Instalasi:
Before installation, it should be check whether the surge protector is intact. If it is damaged or the display window is red, it cannot be used; if the window is green, it is normal.
Informasi lebih lanjut atau konsultasi pribadi? Produk dan pengetahuan kami hadir untuk memberikan solusi.
Optimized by Seraphinite Accelerator
