Produkteigenschaften:
| Spezifikation | BRPV3-1000-12.5VG | |
| SPD classification according to EN61643-31 / IEC61643-31 | Type 1 + Type 2 / Class I + Class II | |
| Max. Dauerbetrieb mit Gleichstrom Stromspannung | Ucpv | 1000V |
| Lightning impulse current (10/350μs) | Iimp | 12.5kA |
| Nominal discharge current (8/20μs) | In | 25kA |
| Max. discharge current (8/20μs) | Imax | 60kA |
| Voltage protection level [(DC+/DC-)→PE] | Hoch | ≤4.0kV |
| Ansprechzeit | tA | ≤100ns |
| Betriebstemperaturbereich | Di | -40℃-80℃ |
| Betriebszustands-/Fehleranzeige | green / red | |
| Cross-section area (Min.) | 4mm² | |
| Cross-section area (Max.) | 35mm² | |
| Zur Montage | 35mm Din rail | |
| Gehäusematerial | Thermoplast UL94-V0 | |
| Schutzart | IP20 | |
| Bestellcode | B18002 | |
| Order code (with remote signal) | B18004 |
Merkmale:
Category: Class I + Class II / Type 1 + Type 2.
Lightning impulse current(10/350us):12.5kA.
Location of use: Photovoltaic systems – PV module side.
Protective elements: High energy MOV and GDT.
Protection modes: (+) → PE, (-) → PE, (+) → (-).
Conform to IEC61643-31 and EN61643-31.
Anwendung:
Surge protection device for the protection of photovoltaic systems from direct and indirect lightning discharge.
Available for photovoltaic applications with a generator voltage of up to 1200 V.
For photovoltaic systems on/on buildings with external lightning protection.
Available as type 1 and type 2 combined lightning current and surge arresters as well as type 2 only surge arrester protective devices.
Installation instruction:
These units must be installed in parallel on the DC networks to be protected and provide common mode protection.
DC surge arrester are designed to protect equipment connected to DC power supplies from lightning surges.
These protectors are recommended when a direct lightning strike is possible on the installation.
Weitere Informationen oder eine persönliche Beratung? Unsere Produkte und unser Know-how sind da, um Lösungen anzubieten.
Optimized by Seraphinite Accelerator
