Produkteigenschaften:
| Spezifikation | BR-25GR 150 1P | BR-25GR 275 1P | BR-25GR 350 1P | |
| SPD-Klassifizierung gemäß EN61643-11 | Type 1 + Type 2 | Type 1 + Type 2 | Type 1 + Type 2 | |
| SPD-Klassifizierung gemäß IEC61643-11 | Class I + Class II | Class I + Class II | Class I + Class II | |
| Nominal operating voltage | Un | 120V(50/60Hz) | 230V(50/60Hz) | 250V(50/60Hz) |
| Max. Dauerbetrieb mit Wechselstrom Stromspannung | Uc | 150V(50/60Hz) | 275V(50/60Hz) | 350V(50/60Hz) |
| Lightning impulse current (10/350μs) | Iimp | 25kA | 25kA | 25kA |
| Nominal discharge current (8/20μs) | In | 25kA | 25kA | 25kA |
| Max. discharge current (8/20μs) | Imax | 100kA | 100kA | 100kA |
| Quantity of electric charge | Q | 12.5As | 12.5As | 12.5As |
| Specific energy | W/R | 156kJ/Ω | 156kJ/Ω | 156kJ/Ω |
| Spannungsschutzniveau | Hoch | ≤1.5kV | ≤1.5kV | ≤1.5kV |
| Short-circuit current rating a.c. | Isccr | 25kA rms | 25kA rms | 25kA rms |
| Max. backup fuse | 315A gG | 315A gG | 315A gG | |
| Temporary overvoltage TOV-withstand | UT | 230V/120min. | 440V/120min. | 580V/120min. |
| Ansprechzeit | tA | ≤100ns | ≤100ns | ≤100ns |
| Betriebstemperaturbereich | Di | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ |
| Operating state/fault indication | green/red | green/red | green/red | |
| Cross-section area (Min.) | 4mm² | 4mm² | 4mm² | |
| Cross-section area (Max.) | 35mm² | 35mm² | 35mm² | |
| Zur Montage | 35mm Din rail | |||
| Gehäusematerial | Thermoplast UL94-V0 | |||
| Schutzart | IP20 | IP20 | IP20 | |
| Bestellcode | B17126 | B17139 | B17152 | |
| Order Code (With remote signaling) | B17127 | B17140 | B17153 | |
Merkmale:
BR-25GR 1P can be assembed to form 2P, 3P and 4P. BR-25GR 1P assembled with BR-50NPE can form BR-25GR 1P+N and if assembled with BR-100NPE can form BR-25GR 3P+N.
High energy surge protection.
Failure detection indicator.
Maximum continuous operating voltage Uc: 150VAC, 275VAC, 350VAC.
Impact current limp(10/350μs) : 25kA
Nominal discharge current In(8/20μs): 25kA
Protection level Up: 1.5kV
Flame retardant plastic are adopted.
Standard modular installation.
Easy installation, directly installed in the standard 35mm rail profiles.
Use:
Suitable for maximum protection of sensitive devices in harsh environments.
It is used at the interface of LPZOA or LPZOB and LPZ1.
It is mainly used for the first stage of surge protection in AC distribution system.
Used to protect electrical and electronic equipment from induced voltages, operating transients and overvoltages.
Widely used in communication equipment, traffic, industrial control and other fields of power protection.
Weitere Informationen oder eine persönliche Beratung? Unsere Produkte und unser Know-how sind da, um Lösungen anzubieten.
Optimized by Seraphinite Accelerator
