{"id":840,"date":"2023-12-18T15:04:36","date_gmt":"2023-12-18T07:04:36","guid":{"rendered":"https:\/\/www.britecelectric.com\/?post_type=blog&p=840"},"modified":"2024-09-05T16:32:14","modified_gmt":"2024-09-05T08:32:14","slug":"standards-related-to-surge-protection-devices","status":"publish","type":"blog","link":"https:\/\/www.britecelectric.com\/nl\/blog\/standards-related-to-surge-protection-devices\/","title":{"rendered":"Normen met betrekking tot overspanningsbeveiligingsapparaten"},"content":{"rendered":"IEC\/EN 61643-11:2011\u00a0<\/strong>\r\nLaagspannings-overspanningsbeveiligingsapparaten \u2013 Deel 11: Overspanningsbeveiligingsapparaten aangesloten op laagspanningsvoedingssystemen \u2013 Vereisten en testmethoden<\/strong>\r\n\r\nIEC 61643-11:2011 is van toepassing op apparaten voor overspanningsbeveiliging tegen indirecte en directe effecten van bliksem of andere voorbijgaande overspanningen. Deze apparaten zijn verpakt om te worden aangesloten op 50\/60 Hz wisselstroom. stroomcircuits en apparatuur met een vermogen tot 1 000 V r.m.s. Prestatiekenmerken, standaardmethoden voor testen en beoordelingen worden vastgesteld. Deze apparaten bevatten minimaal \u00e9\u00e9n niet-lineaire component en zijn bedoeld om stootspanningen te begrenzen en stootstromen af \u200b\u200bte leiden. Deze eerste editie van IEC61643-11 annuleert en vervangt de tweede editie van IEC 61643-1, gepubliceerd in 2005. De belangrijkste veranderingen ten opzichte van de tweede editie van IEC 61643-1 zijn de volledige herstructurering en verbetering van de testprocedures en testsequenties.\r\n\r\nIEC 61643-21:2000\/AMD2:2012\u00a0<\/strong>\r\nLaagspanningsbeveiligingsapparatuur \u2013 Deel 21: Overspanningsbeveiligingsapparatuur aangesloten op telecommunicatie- en signaleringsnetwerken \u2013 Prestatie-eisen en testmethoden<\/strong>\r\n\r\nIEC 61643-12:2020\u00a0<\/strong>\r\nLaagspannings-overspanningsbeveiligingsapparaten \u2013 Deel 12: Overspanningsbeveiligingsapparaten aangesloten op laagspanningsstroomsystemen \u2013 Selectie- en toepassingsprincipes<\/strong>\r\n\r\nIEC 61643-12:2020 describes the principles for the selection, operation, location and coordination of SPDs to be connected to 50\/60 Hz AC power circuits, and equipment rated up to 1 000 V RMS. These devices contain at least one non-linear component and are intended to limit surge voltages and divert surge currents.\r\nNOTE 1 Additional requirements for special applications are also applicable, If required.\r\nNOTE 2 IEC 60364 and IEC 62305-4 are also applicable.\r\nNOTE 3 This standard deal only with SPDs and not with surge protection components\r\n\r\nIEC 61643-22:2015\u00a0<\/strong>\r\nLaagspanningsbeveiligingsapparatuur \u2013 Deel 22: Overspanningsbeveiligingsapparatuur aangesloten op telecommunicatie- en signaleringsnetwerken \u2013 Selectie- en toepassingsprincipes<\/strong>\r\n\r\nIEC 61643-22:2015 describes the principles for the selection, operation, location and coordination of SPDs connected to telecommunication and signalling networks with nominal system voltages up to 1 000 V r.m.s. a.c. and 1 500 V d.c. This standard also addresses SPDs that incorporate protection for signalling lines and power lines in the same enclosure (so called multiservice SPDs). This second edition cancels and replaces the first edition published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:\r\n\u2013 Update the use of multiservice SPDs (Article 8);\r\n\u2013 Comparison between SPD classification of IEC 61643-11 and IEC 61643-21 (7.3.3);\r\n\u2013 Consideration of new transmission systems as PoE (Annex F);\r\n\u2013 EMC requirements of SPDs (Annex G);\r\n\u2013 Maintenance cycles of SPDs (Annex I). Keywords: SPD, surge protective devices\r\n\r\nIEC 61643-31:2018\u00a0<\/strong>\r\nLaagspanningsbeveiligingsapparaten \u2013 Deel 31: Eisen en testmethoden voor SPD\u2019s voor fotovolta\u00efsche installaties<\/strong>\r\n\r\nIEC 61643-31:2018 is van toepassing op overspanningsbeveiligingsapparaten (SPD's), bedoeld voor overspanningsbeveiliging tegen indirecte en directe effecten van bliksem of andere voorbijgaande overspanningen. Deze apparaten zijn ontworpen om te worden aangesloten op de DC-zijde van fotovolta\u00efsche installaties met een vermogen tot 1 500 V DC. Deze apparaten bevatten minimaal \u00e9\u00e9n niet-lineaire component en zijn bedoeld om stootspanningen te begrenzen en stootstromen af \u200b\u200bte leiden. Prestatiekenmerken, veiligheidseisen, standaardmethoden voor testen enwaarderingen worden vastgesteld. SPD's die aan deze norm voldoen, zijn uitsluitend bestemd voor installatie aan de DC-zijde van fotovolta\u00efsche generatoren en aan de DC-zijde van omvormers. SPD's voor PV-systemen met energieopslag (bijvoorbeeld batterijen, condensatorbanken) vallen niet onder de dekking. SPD's met afzonderlijke in- en uitgangsklemmen die een specifieke serie-impedantie tussen deze klem(men) bevatten (zogenaamde SPD's met twee poorten volgens IEC 61643-11:2011) vallen niet onder de dekking. SPD's die aan deze norm voldoen, zijn ontworpen om:permanent worden aangesloten waar het aan- en afkoppelen van vaste SPD's alleen met behulp van gereedschap kan worden gedaan. Deze norm is niet van toepassing op draagbare SPD's.\r\n\r\nIEC 61643-32:2017\u00a0<\/strong>\r\nLaagspannings-overspanningsbeveiligingsapparaten \u2013 Deel 32: Overspanningsbeveiligingsapparaten aangesloten op de d.c. kant van fotovolta\u00efsche installaties \u2013 Selectie- en toepassingsprincipes<\/strong>\r\n\r\nIEC 61643-32:2017 beschrijft de principes voor de selectie, installatie en co\u00f6rdinatie van SPD's bedoeld voor gebruik in fotovolta\u00efsche (PV) systemen tot 1.500 V DC en voor de AC-zijde van het PV-systeem met een nominaal vermogen tot 1.000 V rms 50\/60 Hz. De fotovolta\u00efsche installatie strekt zich uit van een PV-array of een reeks onderling verbonden PV-modules, inclusief de bijbehorende bekabeling en beveiligingsapparatuur en de omvormer, tot aan het aansluitpunt in het verdeelbord of het nutsvoorzieningspunt. Dit deel van IEC 61643houdt rekening met SPD's die op verschillende locaties en in verschillende soorten PV-systemen worden gebruikt: PV-systemen die zich op de top van een gebouw bevinden. PV-systemen die zich op de grond bevinden, lijken op elektriciteitscentrales in het vrije veld en worden gekenmerkt door meervoudige aarding en een vermaasd aardingssysteem. De term PV-installatie wordt gebruikt om naar beide soorten PV-systemen te verwijzen. De term PV-energiecentrale wordt alleen gebruikt voor uitgebreide vrijveld-meergeaarde energiesystemen die zich op de grond bevinden. Voor PV-installaties inclusief batterijen gelden aanvullende eisenkan nodig zijn.\r\n\r\nIEC 62561-1:2017 RLV\u00a0<\/strong>\r\nRedline-versie<\/strong>\r\nComponenten van bliksembeveiligingssysteem (LPSC) \u2013 Deel 1: Vereisten voor verbindingscomponenten<\/strong>\r\n\r\nIEC 62561-1:2017 RLV contains both the official IEC International Standard and its Redline version. The Redline version is not an official document, it is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.\r\n\r\nIEC 62561-1:2017 specifies the requirements and tests for metallic connection components that form part of a lightning protection system (LPS). Typically, these can be connectors, clamps, bonding and bridging components, expansion pieces and test joints.\r\nFor the purposes of this document the following connection types are considered as connection components: exothermic, brazing, welding, clamping, crimping, seaming, screwing or bolting. Testing of components for an explosive atmosphere is not covered by this document.\r\nThis second edition cancels and replaces the first edition, published in 2012. This edition constitutes a technical revision.\r\nThis edition includes the following significant technical changes with respect to the previous edition:\r\na. classification of connection components in permanent and non-permanent connection;\r\nb. requirements and corresponding tests for permanent connection components such as exothermic, brazing, welding, crimping, seaming;\r\nc. flow chart of tests for connection components.","protected":false},"featured_media":841,"parent":0,"menu_order":157,"template":"","meta":{"_acf_changed":false},"blog_category":[8],"class_list":["post-840","blog","type-blog","status-publish","has-post-thumbnail","hentry","blog_category-company-news"],"acf":{"des":"Low-voltage surge protective devices\u2013Part11: Surge protective devices connected to low-voltage power systems\u2013Requirements and test methods","txt":"IEC\/EN 61643-11:2011\u00a0<\/strong>\r\nLow-voltage surge protective devices\u2013Part11: Surge protective devices connected to low-voltage power systems\u2013Requirements and test methods<\/strong>\r\n\r\nIEC 61643-11:2011 is applicable to devices for surge protection against indirect and direct effects of lightning or other transient overvoltages. These devices are packaged to be connected to 50\/60 Hz a.c. power circuits, and equipment rated up to 1 000 V r.m.s. Performance characteristics, standard methods for testing and ratings are established. These devices contain at least one nonlinear component and are intended to limit surge voltages and divert surge currents. This first edition of IEC 61643-11 cancels and replaces the second edition of IEC 61643-1 published in 2005. The main changes with respect of the second edition of IEC 61643-1 are the complete restructuring and improvement of the test procedures and test sequences.\r\n\r\nIEC 61643-21:2000\/AMD2:2012\u00a0<\/strong>\r\nLow voltage surge protective devices \u2013 Part 21: Surge protective devices connected to telecommunications and signalling networks \u2013 Performance requirements and testing methods<\/strong>\r\n\r\nIEC 61643-12:2020\u00a0<\/strong>\r\nLow-voltage surge protective devices \u2013 Part 12: Surge protective devices connected to low-voltage power systems \u2013 Selection and application principles<\/strong>\r\n\r\nIEC 61643-12:2020 describes the principles for the selection, operation, location and coordination of SPDs to be connected to 50\/60 Hz AC power circuits, and equipment rated up to 1 000 V RMS. These devices contain at least one non-linear component and are intended to limit surge voltages and divert surge currents.\r\nNOTE 1 Additional requirements for special applications are also applicable, If required.\r\nNOTE 2 IEC 60364 and IEC 62305-4 are also applicable.\r\nNOTE 3 This standard deal only with SPDs and not with surge protection components\r\n\r\nIEC 61643-22:2015\u00a0<\/strong>\r\nLow-voltage surge protective devices \u2013 Part 22: Surge protective devices connected to telecommunications and signalling networks \u2013 Selection and application principles<\/strong>\r\n\r\nIEC 61643-22:2015 describes the principles for the selection, operation, location and coordination of SPDs connected to telecommunication and signalling networks with nominal system voltages up to 1 000 V r.m.s. a.c. and 1 500 V d.c. This standard also addresses SPDs that incorporate protection for signalling lines and power lines in the same enclosure (so called multiservice SPDs). This second edition cancels and replaces the first edition published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:\r\n\u2013 Update the use of multiservice SPDs (Article 8);\r\n\u2013 Comparison between SPD classification of IEC 61643-11 and IEC 61643-21 (7.3.3);\r\n\u2013 Consideration of new transmission systems as PoE (Annex F);\r\n\u2013 EMC requirements of SPDs (Annex G);\r\n\u2013 Maintenance cycles of SPDs (Annex I). Keywords: SPD, surge protective devices\r\n\r\nIEC 61643-31:2018\u00a0<\/strong>\r\nLow-voltage surge protective devices \u2013 Part 31: Requirements and test methods for SPDs for photovoltaic installations<\/strong>\r\n\r\nIEC 61643-31:2018 is applicable to Surge Protective Devices (SPDs), intended for surge protection against indirect and direct effects of lightning or other transient overvoltages. These devices are designed to be connected to the DC side of photovoltaic installations rated up to 1 500 V DC. These devices contain at least one non-linear component and are intended to limit surge voltages and divert surge currents. Performance characteristics, safety requirements, standard methods for testing and ratings are established.\u00a0 SPDs complying with this standard are exclusively dedicated to be installed on the DC side of photovoltaic generators and the DC side of inverters. SPDs for PV systems with energy storage (e.g. batteries, capacitor banks) are not covered. SPDs with separate input and output terminals that contain specific series impedance between these terminal(s) (so called two-port SPDs according to IEC 61643-11:2011) are not covered. SPDs compliant with this standard are designed to be permanently connected where connection and disconnection of fixed SPDs can only be done using a tool. This standard does not apply to portable SPDs.\r\n\r\nIEC 61643-32:2017\u00a0<\/strong>\r\nLow-voltage surge protective devices \u2013 Part 32: Surge protective devices connected to the d.c. side of photovoltaic installations \u2013 Selection and application principles<\/strong>\r\n\r\nIEC 61643-32:2017 describes the principles for selection, installation and coordination of SPDs intended for use in Photovoltaic (PV) systems up to 1 500 V DC and for the AC side of the PV system rated up to 1 000 V rms 50\/60 Hz. The photovoltaic installation extends from a PV array or a set of interconnected PV-modules to include the associated cabling and protective devices and the inverter up to the connection point in the distribution board or the utility supply point. This part of IEC 61643 considers SPDs used in different locations and in different kinds of PV systems:PV systems located on the top of a building. PV systems located on the ground like free field power plants characterized by multiple earthing and a meshed earthing system. The term PV installation is used to refer to both kinds of PV systems. The term PV power plant is only used for extended free-field multi-earthed power systems located on the ground. For PV installations including batteries additional requirements may be necessary.\r\n\r\nIEC 62561-1:2017 RLV\u00a0<\/strong>\r\nRedline version<\/strong>\r\nLightning protection system components (LPSC) \u2013 Part 1: Requirements for connection components<\/strong>\r\n\r\nIEC 62561-1:2017 RLV contains both the official IEC International Standard and its Redline version. The Redline version is not an official document, it is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.\r\n\r\nIEC 62561-1:2017 specifies the requirements and tests for metallic connection components that form part of a lightning protection system (LPS). Typically, these can be connectors, clamps, bonding and bridging components, expansion pieces and test joints.\r\nFor the purposes of this document the following connection types are considered as connection components: exothermic, brazing, welding, clamping, crimping, seaming, screwing or bolting. Testing of components for an explosive atmosphere is not covered by this document.\r\nThis second edition cancels and replaces the first edition, published in 2012. This edition constitutes a technical revision.\r\nThis edition includes the following significant technical changes with respect to the previous edition:\r\na. classification of connection components in permanent and non-permanent connection;\r\nb. requirements and corresponding tests for permanent connection components such as exothermic, brazing, welding, crimping, seaming;\r\nc. flow chart of tests for connection components."},"_links":{"self":[{"href":"https:\/\/www.britecelectric.com\/nl\/wp-json\/wp\/v2\/blog\/840","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.britecelectric.com\/nl\/wp-json\/wp\/v2\/blog"}],"about":[{"href":"https:\/\/www.britecelectric.com\/nl\/wp-json\/wp\/v2\/types\/blog"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.britecelectric.com\/nl\/wp-json\/wp\/v2\/media\/841"}],"wp:attachment":[{"href":"https:\/\/www.britecelectric.com\/nl\/wp-json\/wp\/v2\/media?parent=840"}],"wp:term":[{"taxonomy":"blog_category","embeddable":true,"href":"https:\/\/www.britecelectric.com\/nl\/wp-json\/wp\/v2\/blog_category?post=840"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}