{"id":840,"date":"2023-12-18T15:04:36","date_gmt":"2023-12-18T07:04:36","guid":{"rendered":"https:\/\/www.britecelectric.com\/?post_type=blog&p=840"},"modified":"2024-09-05T16:32:14","modified_gmt":"2024-09-05T08:32:14","slug":"standards-related-to-surge-protection-devices","status":"publish","type":"blog","link":"https:\/\/www.britecelectric.com\/fi\/blog\/standards-related-to-surge-protection-devices\/","title":{"rendered":"Ylij\u00e4nnitesuojalaitteita koskevat standardit"},"content":{"rendered":"IEC\/EN 61643-11:2011\u00a0<\/strong>\r\nPienj\u00e4nnitteiset ylij\u00e4nnitesuojat \u2013 Osa 11: Pienj\u00e4nniteverkkoihin kytketyt ylij\u00e4nnitesuojat \u2013 Vaatimukset ja testausmenetelm\u00e4t<\/strong>\r\n\r\nIEC 61643-11:2011 koskee ylij\u00e4nnitesuojalaitteita salaman tai muiden ohimenevien ylij\u00e4nnitteiden ep\u00e4suoria ja suoria vaikutuksia vastaan. N\u00e4m\u00e4 laitteet on pakattu liitett\u00e4v\u00e4ksi 50\/60 Hz vaihtovirtaan. tehopiirit ja laitteet, joiden nimellisj\u00e4nnite on enint\u00e4\u00e4n 1 000 V rm.s. Suorituskykyominaisuudet, vakiotestausmenetelm\u00e4t ja luokitukset on vahvistettu. N\u00e4m\u00e4 laitteet sis\u00e4lt\u00e4v\u00e4t v\u00e4hint\u00e4\u00e4n yhden ep\u00e4lineaarisen komponentin, ja ne on tarkoitettu rajoittamaan ylij\u00e4nnitej\u00e4nnitteit\u00e4 ja k\u00e4\u00e4nt\u00e4m\u00e4\u00e4n ylij\u00e4nnitevirtoja. T\u00e4m\u00e4 IEC:n ensimm\u00e4inen painos61643-11 kumoaa ja korvaa standardin IEC 61643-1 toisen painoksen, joka julkaistiin vuonna 2005. T\u00e4rkeimm\u00e4t muutokset suhteessa IEC 61643-1:n toiseen painokseen ovat testimenettelyjen ja testisekvenssien t\u00e4ydellinen uudelleenj\u00e4rjestely ja parantaminen.\r\n\r\nIEC 61643-21:2000\/AMD2:2012\u00a0<\/strong>\r\nPienj\u00e4nnitteiset ylij\u00e4nnitesuojalaitteet \u2013 Osa 21: Tietoliikenne- ja merkinantoverkkoihin liitetyt ylij\u00e4nnitesuojalaitteet \u2013 Suorituskykyvaatimukset ja testausmenetelm\u00e4t<\/strong>\r\n\r\nIEC 61643-12:2020\u00a0<\/strong>\r\nPienj\u00e4nnitteiset ylij\u00e4nnitesuojat \u2013 Osa 12: Pienj\u00e4nniteverkkoihin kytketyt ylij\u00e4nnitesuojalaitteet \u2013 Valinta- ja k\u00e4ytt\u00f6periaatteet<\/strong>\r\n\r\nIEC 61643-12:2020 describes the principles for the selection, operation, location and coordination of SPDs to be connected to 50\/60 Hz AC power circuits, and equipment rated up to 1 000 V RMS. These devices contain at least one non-linear component and are intended to limit surge voltages and divert surge currents.\r\nNOTE 1 Additional requirements for special applications are also applicable, If required.\r\nNOTE 2 IEC 60364 and IEC 62305-4 are also applicable.\r\nNOTE 3 This standard deal only with SPDs and not with surge protection components\r\n\r\nIEC 61643-22:2015\u00a0<\/strong>\r\nPienj\u00e4nnitteiset ylij\u00e4nnitesuojat \u2013 Osa 22: Tietoliikenne- ja merkinantoverkkoihin liitetyt ylij\u00e4nnitesuojalaitteet \u2013 Valinta- ja sovellusperiaatteet<\/strong>\r\n\r\nIEC 61643-22:2015 describes the principles for the selection, operation, location and coordination of SPDs connected to telecommunication and signalling networks with nominal system voltages up to 1 000 V r.m.s. a.c. and 1 500 V d.c. This standard also addresses SPDs that incorporate protection for signalling lines and power lines in the same enclosure (so called multiservice SPDs). This second edition cancels and replaces the first edition published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:\r\n\u2013 Update the use of multiservice SPDs (Article 8);\r\n\u2013 Comparison between SPD classification of IEC 61643-11 and IEC 61643-21 (7.3.3);\r\n\u2013 Consideration of new transmission systems as PoE (Annex F);\r\n\u2013 EMC requirements of SPDs (Annex G);\r\n\u2013 Maintenance cycles of SPDs (Annex I). Keywords: SPD, surge protective devices\r\n\r\nIEC 61643-31:2018\u00a0<\/strong>\r\nPienj\u00e4nnitteiset ylij\u00e4nnitesuojalaitteet \u2013 Osa 31: Vaatimukset ja testausmenetelm\u00e4t aurinkos\u00e4hk\u00f6asennusten SPD:ille<\/strong>\r\n\r\nIEC 61643-31:2018 koskee ylij\u00e4nnitesuojalaitteita (SPD), jotka on tarkoitettu ylij\u00e4nnitesuojaukseen salaman tai muiden ohimenevien ylij\u00e4nnitteiden ep\u00e4suoria ja suoria vaikutuksia vastaan. N\u00e4m\u00e4 laitteet on suunniteltu kytkett\u00e4v\u00e4ksi DC-puolelle aurinkos\u00e4hk\u00f6asennuksissa, joiden nimellisj\u00e4nnite on enint\u00e4\u00e4n 1 500 V DC. N\u00e4m\u00e4 laitteet sis\u00e4lt\u00e4v\u00e4t v\u00e4hint\u00e4\u00e4n yhden ep\u00e4lineaarisen komponentin, ja ne on tarkoitettu rajoittamaan ylij\u00e4nnitej\u00e4nnitteit\u00e4 ja k\u00e4\u00e4nt\u00e4m\u00e4\u00e4n ylij\u00e4nnitevirtoja. Suorituskykyominaisuudet, turvallisuusvaatimukset, standardimenetelm\u00e4t testaukseen jaluokitukset perustetaan. T\u00e4m\u00e4n standardin mukaiset SPD:t on tarkoitettu asennettavaksi yksinomaan aurinkos\u00e4hk\u00f6generaattoreiden tasavirtapuolelle ja invertterien tasavirtapuolelle. Energiaa varastoivien aurinkos\u00e4hk\u00f6j\u00e4rjestelmien (esim. akut, kondensaattoripankit) SPD-asiakirjat eiv\u00e4t kuulu t\u00e4h\u00e4n. SPD:t, joissa on erilliset tulo- ja l\u00e4ht\u00f6liittimet, jotka sis\u00e4lt\u00e4v\u00e4t tietyn sarjaimpedanssin n\u00e4iden liittimien v\u00e4lill\u00e4 (ns. kaksiporttiset SPD:t standardin IEC 61643-11:2011 mukaisesti), eiv\u00e4t kuulu t\u00e4h\u00e4n. T\u00e4m\u00e4n standardin mukaiset SPD:t on suunniteltuolla pysyv\u00e4sti kytkettyn\u00e4, jos kiinteiden SPD:iden liitt\u00e4minen ja irrottaminen voidaan tehd\u00e4 vain ty\u00f6kalulla. T\u00e4m\u00e4 standardi ei koske kannettavia SPD:it\u00e4.\r\n\r\nIEC 61643-32:2017\u00a0<\/strong>\r\nPienj\u00e4nnitteiset ylij\u00e4nnitesuojat \u2013 Osa 32: Tasavirtaan kytketyt ylij\u00e4nnitesuojat. aurinkos\u00e4hk\u00f6asennusten puoli \u2013 Valinta- ja k\u00e4ytt\u00f6periaatteet<\/strong>\r\n\r\nStandardissa IEC 61643-32:2017 kuvataan periaatteet aurinkos\u00e4hk\u00f6j\u00e4rjestelmiss\u00e4 (PV) k\u00e4ytett\u00e4viksi tarkoitettujen SPD-laitteiden valinnalle, asennukselle ja koordinoinnille 1 500 V DC:iin asti ja aurinkos\u00e4hk\u00f6j\u00e4rjestelm\u00e4n vaihtovirtapuolelle 1 000 V rms 50\/60 Hz asti. Aurinkos\u00e4hk\u00f6asennus ulottuu aurinkos\u00e4hk\u00f6j\u00e4rjestelm\u00e4st\u00e4 tai joukosta toisiinsa kytkettyj\u00e4 PV-moduuleita sis\u00e4lt\u00e4en siihen liittyv\u00e4t kaapelointi- ja suojalaitteet sek\u00e4 invertterin jakokeskuksen tai s\u00e4hk\u00f6nsy\u00f6tt\u00f6pisteen liit\u00e4nt\u00e4pisteeseen asti. T\u00e4m\u00e4 osa standardista IEC 61643ottaa huomioon SPD:t, joita k\u00e4ytet\u00e4\u00e4n eri paikoissa ja erilaisissa aurinkos\u00e4hk\u00f6j\u00e4rjestelmiss\u00e4: rakennuksen p\u00e4\u00e4ll\u00e4 sijaitsevat aurinkos\u00e4hk\u00f6j\u00e4rjestelm\u00e4t. Maan p\u00e4\u00e4ll\u00e4 sijaitsevat aurinkos\u00e4hk\u00f6j\u00e4rjestelm\u00e4t kuten vapaan kent\u00e4n voimalaitokset, joille on ominaista moninkertainen maadoitus ja verkkomaadoitusj\u00e4rjestelm\u00e4. Termi\u00e4 PV-asennus k\u00e4ytet\u00e4\u00e4n viittaamaan molempiin aurinkos\u00e4hk\u00f6j\u00e4rjestelmiin. Termi\u00e4 PV-voimalaitos k\u00e4ytet\u00e4\u00e4n vain laajennetuista vapaan kent\u00e4n monimaadoitettuista s\u00e4hk\u00f6j\u00e4rjestelmist\u00e4, jotka sijaitsevat maassa. PV-asennuksille, mukaan lukien akut, lis\u00e4vaatimuksetvoi olla tarpeen.\r\n\r\nIEC 62561-1:2017 RLV\u00a0<\/strong>\r\nRedline versio<\/strong>\r\nSalamansuojausj\u00e4rjestelm\u00e4n komponentit (LPSC) \u2013 Osa 1: Liit\u00e4nt\u00e4komponentteja koskevat vaatimukset<\/strong>\r\n\r\nIEC 62561-1:2017 RLV contains both the official IEC International Standard and its Redline version. The Redline version is not an official document, it is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.\r\n\r\nIEC 62561-1:2017 specifies the requirements and tests for metallic connection components that form part of a lightning protection system (LPS). Typically, these can be connectors, clamps, bonding and bridging components, expansion pieces and test joints.\r\nFor the purposes of this document the following connection types are considered as connection components: exothermic, brazing, welding, clamping, crimping, seaming, screwing or bolting. Testing of components for an explosive atmosphere is not covered by this document.\r\nThis second edition cancels and replaces the first edition, published in 2012. This edition constitutes a technical revision.\r\nThis edition includes the following significant technical changes with respect to the previous edition:\r\na. classification of connection components in permanent and non-permanent connection;\r\nb. requirements and corresponding tests for permanent connection components such as exothermic, brazing, welding, crimping, seaming;\r\nc. flow chart of tests for connection components.","protected":false},"featured_media":841,"parent":0,"menu_order":157,"template":"","meta":{"_acf_changed":false},"blog_category":[8],"class_list":["post-840","blog","type-blog","status-publish","has-post-thumbnail","hentry","blog_category-company-news"],"acf":{"des":"Low-voltage surge protective devices\u2013Part11: Surge protective devices connected to low-voltage power systems\u2013Requirements and test methods","txt":"IEC\/EN 61643-11:2011\u00a0<\/strong>\r\nLow-voltage surge protective devices\u2013Part11: Surge protective devices connected to low-voltage power systems\u2013Requirements and test methods<\/strong>\r\n\r\nIEC 61643-11:2011 is applicable to devices for surge protection against indirect and direct effects of lightning or other transient overvoltages. These devices are packaged to be connected to 50\/60 Hz a.c. power circuits, and equipment rated up to 1 000 V r.m.s. Performance characteristics, standard methods for testing and ratings are established. These devices contain at least one nonlinear component and are intended to limit surge voltages and divert surge currents. This first edition of IEC 61643-11 cancels and replaces the second edition of IEC 61643-1 published in 2005. The main changes with respect of the second edition of IEC 61643-1 are the complete restructuring and improvement of the test procedures and test sequences.\r\n\r\nIEC 61643-21:2000\/AMD2:2012\u00a0<\/strong>\r\nLow voltage surge protective devices \u2013 Part 21: Surge protective devices connected to telecommunications and signalling networks \u2013 Performance requirements and testing methods<\/strong>\r\n\r\nIEC 61643-12:2020\u00a0<\/strong>\r\nLow-voltage surge protective devices \u2013 Part 12: Surge protective devices connected to low-voltage power systems \u2013 Selection and application principles<\/strong>\r\n\r\nIEC 61643-12:2020 describes the principles for the selection, operation, location and coordination of SPDs to be connected to 50\/60 Hz AC power circuits, and equipment rated up to 1 000 V RMS. These devices contain at least one non-linear component and are intended to limit surge voltages and divert surge currents.\r\nNOTE 1 Additional requirements for special applications are also applicable, If required.\r\nNOTE 2 IEC 60364 and IEC 62305-4 are also applicable.\r\nNOTE 3 This standard deal only with SPDs and not with surge protection components\r\n\r\nIEC 61643-22:2015\u00a0<\/strong>\r\nLow-voltage surge protective devices \u2013 Part 22: Surge protective devices connected to telecommunications and signalling networks \u2013 Selection and application principles<\/strong>\r\n\r\nIEC 61643-22:2015 describes the principles for the selection, operation, location and coordination of SPDs connected to telecommunication and signalling networks with nominal system voltages up to 1 000 V r.m.s. a.c. and 1 500 V d.c. This standard also addresses SPDs that incorporate protection for signalling lines and power lines in the same enclosure (so called multiservice SPDs). This second edition cancels and replaces the first edition published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:\r\n\u2013 Update the use of multiservice SPDs (Article 8);\r\n\u2013 Comparison between SPD classification of IEC 61643-11 and IEC 61643-21 (7.3.3);\r\n\u2013 Consideration of new transmission systems as PoE (Annex F);\r\n\u2013 EMC requirements of SPDs (Annex G);\r\n\u2013 Maintenance cycles of SPDs (Annex I). Keywords: SPD, surge protective devices\r\n\r\nIEC 61643-31:2018\u00a0<\/strong>\r\nLow-voltage surge protective devices \u2013 Part 31: Requirements and test methods for SPDs for photovoltaic installations<\/strong>\r\n\r\nIEC 61643-31:2018 is applicable to Surge Protective Devices (SPDs), intended for surge protection against indirect and direct effects of lightning or other transient overvoltages. These devices are designed to be connected to the DC side of photovoltaic installations rated up to 1 500 V DC. These devices contain at least one non-linear component and are intended to limit surge voltages and divert surge currents. Performance characteristics, safety requirements, standard methods for testing and ratings are established.\u00a0 SPDs complying with this standard are exclusively dedicated to be installed on the DC side of photovoltaic generators and the DC side of inverters. SPDs for PV systems with energy storage (e.g. batteries, capacitor banks) are not covered. SPDs with separate input and output terminals that contain specific series impedance between these terminal(s) (so called two-port SPDs according to IEC 61643-11:2011) are not covered. SPDs compliant with this standard are designed to be permanently connected where connection and disconnection of fixed SPDs can only be done using a tool. This standard does not apply to portable SPDs.\r\n\r\nIEC 61643-32:2017\u00a0<\/strong>\r\nLow-voltage surge protective devices \u2013 Part 32: Surge protective devices connected to the d.c. side of photovoltaic installations \u2013 Selection and application principles<\/strong>\r\n\r\nIEC 61643-32:2017 describes the principles for selection, installation and coordination of SPDs intended for use in Photovoltaic (PV) systems up to 1 500 V DC and for the AC side of the PV system rated up to 1 000 V rms 50\/60 Hz. The photovoltaic installation extends from a PV array or a set of interconnected PV-modules to include the associated cabling and protective devices and the inverter up to the connection point in the distribution board or the utility supply point. This part of IEC 61643 considers SPDs used in different locations and in different kinds of PV systems:PV systems located on the top of a building. PV systems located on the ground like free field power plants characterized by multiple earthing and a meshed earthing system. The term PV installation is used to refer to both kinds of PV systems. The term PV power plant is only used for extended free-field multi-earthed power systems located on the ground. For PV installations including batteries additional requirements may be necessary.\r\n\r\nIEC 62561-1:2017 RLV\u00a0<\/strong>\r\nRedline version<\/strong>\r\nLightning protection system components (LPSC) \u2013 Part 1: Requirements for connection components<\/strong>\r\n\r\nIEC 62561-1:2017 RLV contains both the official IEC International Standard and its Redline version. The Redline version is not an official document, it is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.\r\n\r\nIEC 62561-1:2017 specifies the requirements and tests for metallic connection components that form part of a lightning protection system (LPS). Typically, these can be connectors, clamps, bonding and bridging components, expansion pieces and test joints.\r\nFor the purposes of this document the following connection types are considered as connection components: exothermic, brazing, welding, clamping, crimping, seaming, screwing or bolting. Testing of components for an explosive atmosphere is not covered by this document.\r\nThis second edition cancels and replaces the first edition, published in 2012. This edition constitutes a technical revision.\r\nThis edition includes the following significant technical changes with respect to the previous edition:\r\na. classification of connection components in permanent and non-permanent connection;\r\nb. requirements and corresponding tests for permanent connection components such as exothermic, brazing, welding, crimping, seaming;\r\nc. flow chart of tests for connection components."},"_links":{"self":[{"href":"https:\/\/www.britecelectric.com\/fi\/wp-json\/wp\/v2\/blog\/840","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.britecelectric.com\/fi\/wp-json\/wp\/v2\/blog"}],"about":[{"href":"https:\/\/www.britecelectric.com\/fi\/wp-json\/wp\/v2\/types\/blog"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.britecelectric.com\/fi\/wp-json\/wp\/v2\/media\/841"}],"wp:attachment":[{"href":"https:\/\/www.britecelectric.com\/fi\/wp-json\/wp\/v2\/media?parent=840"}],"wp:term":[{"taxonomy":"blog_category","embeddable":true,"href":"https:\/\/www.britecelectric.com\/fi\/wp-json\/wp\/v2\/blog_category?post=840"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}