...

BR-30FU 1+1 30kA Type 2 Surge Protector

Λάβετε μια προσφορά
Περιγραφή

Χαρακτηριστικά προϊόντος:

Προσδιορισμός BR-30FU 150 1+1 BR-30FU 275 1+1 BR-30FU 320 1+1 BR-30FU 385 1+1 BR-30FU 440 1+1
SPD classification according to EN61643-11 Τύπος 2 Τύπος 2 Τύπος 2 Τύπος 2 Τύπος 2
SPD classification according to IEC61643-11 Class II Class II Class II Class II Class II
Max. continuous operating a.c. voltage(L-N) Uc 150V 275V 320V 385V 440V
Max. continuous operating a.c. voltage(N-PE) Uc 255 V 255 V 255 V 255 V 255 V
Nominal discharge current (8/20μs)(L-N/N-PE) Σε 15kA/20kA 15kA/20kA 15kA/20kA 15kA/20kA 15kA/20kA
Max. discharge current (8/20μs)      (L-N/N-PE) Imax 30kA/40kA 30kA/40kA 30kA/40kA 30kA/40kA 30kA/40kA
Voltage protection level (L-N) Επάνω ≤0.8kV ≤1.3kV ≤1.5kV ≤1.8kV ≤2.0kV
Voltage protection level 5kA (L-N) Επάνω ≤0.6kV ≤1kV ≤1.2kV ≤1.3kV ≤1.5kV
Voltage protection level (N-PE) Επάνω ≤1.5kV ≤1.5kV ≤1.5kV ≤1.5kV ≤1.5kV
Short-circuit withstand capacity Isccr 25 kA 25 kA 25 kA 25 kA 25 kA
Temporary overvoltage TOV-withstand (L-N) UT 180V/5sec. 335V/5sec. 400V/5sec. 500V/5sec. 580V/5sec.
Temporary overvoltage TOV-safe failure(L-N) UT 230V/120min. 440V/120min. 520V/120min. 650V/120min. 765V/120min.
Temporary overvoltage TOV-withstand(N-PE) UT 1200V/200ms 1200V/200ms 1200V/200ms 1200V/200ms 1200V/200ms
Response time (L-N) tA ≤25ns ≤25ns ≤25ns ≤25ns ≤25ns
Response time (N-PE) tA ≤100ns ≤100ns ≤100ns ≤100ns ≤100ns
Εύρος θερμοκρασίας λειτουργίας Tu -40℃-80℃ -40℃-80℃ -40℃-80℃ -40℃-80℃ -40℃-80℃
Operating state/fault indication green/red green/red green/red green/red green/red
Εμβαδόν διατομής (ελάχ.) 4mm² 4mm² 4mm² 4mm² 4mm²
Εμβαδόν διατομής (Μέγ.) 35 mm² 35 mm² 35 mm² 35 mm² 35 mm²
Για τοποθέτηση σε Ράγα Din 35mm
Υλικό περιβλήματος Thermoplastic   UL94-V0
Βαθμός προστασίας IP20 IP20 IP20 IP20 IP20
Order Code B16108 B16120 B16132 B16144 B16156
Order Code (With remote signaling) B16109 B16121 B16133 B16145 B16157

Χαρακτηριστικά:

Type 2 Surge Protection Device – an advanced surge protector that provides comprehensive protection to electrical and electronic devices from damaging power surges.

This device is designed for DIN Rail mounting

IP20 level of protection.

The protection circuitry is based on high energy varistor with thermal disconnection devices.

It also has a fast response time of less than 25 nanoseconds

There is an indicator on the cartridges to signal failure mode.

This Type 2 Surge Protection Device is an ideal choice for commercial and residential applications.

Humidity: Up To 95% RH

Volt-free contacts for remote indication

Operating temperature range: -40°C → +80°C

Conform to IEC61643-11 standards

This is installed in to each electrical switch boards and prevents the spread of surges in the electric systems, protecting the loads.

Εφαρμογή:

Protection of terminal devices.

Used in AC power line of house, bank, telecom tower and so on.

Used for protection against electrical transients.

 

ΕΙΜΑΣΤΕ ΕΔΩ ΓΙΑ ΝΑ ΣΑΣ ΥΠΟΣΤΗΡΙΞΟΥΜΕ!

Περισσότερες πληροφορίες ή προσωπική διαβούλευση; Τα προϊόντα και η τεχνογνωσία μας υπάρχουν για να δώσουν λύσεις.

ΣΧΕΤΙΚΑ ΠΡΟΪΟΝΤΑ
ΣΧΕΤΙΚΑ ΝΕΑ
ΜΠΟΡΕΙ ΕΠΙΣΗΣ ΝΑ ΘΕΛΕΤΕ ΝΑ ΔΕΙΤΕ
ΑΠΟΚΤΗΣΤΕ ΤΗΝ ΠΡΟΣΤΑΣΙΑ ΑΠΟ ΤΥΠΟΥΣ
ΛΥΣΗ ΣΗΜΕΡΑ!
εικόνισμα
εικόνισμα
Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.