Χαρακτηριστικά προϊόντος:
| Προσδιορισμός | BR-25GR 150 3P | BR-25GR 275 3P | BR-25GR 350 3P | |
| SPD classification according to EN61643-11 | Type 1 + Type 2 | Type 1 + Type 2 | Type 1 + Type 2 | |
| SPD classification according to IEC61643-11 | Class I + Class II | Class I + Class II | Class I + Class II | |
| Nominal operating voltage | Ηνωμένα Έθνη | 120V/240V(50/60Hz) | 230V/400V(50/60Hz) | 250V/440V(50/60Hz) |
| Max. continuous operating a.c. voltage | Uc | 150V(50/60Hz) | 275V(50/60Hz) | 350V(50/60Hz) |
| Lightning impulse current (10/350μs) | Iimp | 25 kA | 25 kA | 25 kA |
| Ονομαστικό ρεύμα εκφόρτισης (8/20μs) | Σε | 25 kA | 25 kA | 25 kA |
| Μέγ. ρεύμα εκφόρτισης (8/20μs) | Imax | 100kA | 100kA | 100kA |
| Quantity of electric charge | Q | 12.5As | 12.5As | 12.5As |
| Specific energy | W/R | 156kJ/Ω | 156kJ/Ω | 156kJ/Ω |
| Επίπεδο προστασίας τάσης | Επάνω | ≤1.5kV | ≤1.5kV | ≤1.5kV |
| Short-circuit current rating a.c. | Isccr | 25kA rms | 25kA rms | 25kA rms |
| Max. backup fuse | 315A gG | 315A gG | 315A gG | |
| Temporary overvoltage TOV-withstand | UT | 230V/120min. | 440V/120min. | 580V/120min. |
| Χρόνος απόκρισης | tA | ≤100ns | ≤100ns | ≤100ns |
| Εύρος θερμοκρασίας λειτουργίας | Tu | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ |
| Operating state/fault indication | green/red | green/red | green/red | |
| Εμβαδόν διατομής (ελάχ.) | 4mm² | 4mm² | 4mm² | |
| Εμβαδόν διατομής (Μέγ.) | 35 mm² | 35 mm² | 35 mm² | |
| Για τοποθέτηση σε | Ράγα Din 35mm | |||
| Υλικό περιβλήματος | Θερμοπλαστικό UL94-V0 | |||
| Βαθμός προστασίας | IP20 | IP20 | IP20 | |
| Order Code | B17122 | B17135 | B17148 | |
| Order Code (With remote signaling) | B17123 | B17136 | B17149 | |
Χαρακτηριστικά:
Indicating window.
Designed according to IEC 61643-11.
A protective device that prevents lightning overvoltage and transient overcurrent from intruding into the power supply line from disrupting the normal operation of the power supply system and electrical equipment.
High performance varistor with thermal disconnection tripping device
Three-phase AC power surge arrester
Protection class: Type 1,Class I
Parallel surge protection device
Surge areeare used to guard sensitive equipments from voltage spike.
With high lightning current discharge capacity
Impact discharge current of single module reaches 25kA(10/350)
The Type 1 arresters combine high performance and user-friendliness in a single device. Their electrical parameters were rated for the most stringent requirements within lightning and surge protection systems.
Imax: 100KA(8/20)
Εφαρμογή:
• It is applicable to lightning protection for the power system in areas with high lightning risk (LPZ0B or the interface between LPZ0B and LPZ1).
• Suitable for three-phase TN-C power supply systems with AC of 50 to 60Hz
• Mainly used for TN-C power supply system (B) level overvoltage protection
• Generally installed in the building into the low-voltage main distribution cabinet or low-voltage main switch.
Εγκατάσταση:
It is installed in parallel in the main distribution inlet panel at the low-voltage entry end of transformer, the distribution box with overhead input in the building, the outdoor distribution cabinet/distribution box and other positions.
Περισσότερες πληροφορίες ή προσωπική διαβούλευση; Τα προϊόντα και η τεχνογνωσία μας υπάρχουν για να δώσουν λύσεις.
Optimized by Seraphinite Accelerator
