Χαρακτηριστικά προϊόντος:
| Προσδιορισμός | BR-25GR 150 1P | BR-25GR 275 1P | BR-25GR 350 1P | |
| SPD classification according to EN61643-11 | Type 1 + Type 2 | Type 1 + Type 2 | Type 1 + Type 2 | |
| SPD classification according to IEC61643-11 | Class I + Class II | Class I + Class II | Class I + Class II | |
| Nominal operating voltage | Ηνωμένα Έθνη | 120V(50/60Hz) | 230V(50/60Hz) | 250V(50/60Hz) |
| Max. continuous operating a.c. voltage | Uc | 150V(50/60Hz) | 275V(50/60Hz) | 350V(50/60Hz) |
| Lightning impulse current (10/350μs) | Iimp | 25 kA | 25 kA | 25 kA |
| Ονομαστικό ρεύμα εκφόρτισης (8/20μs) | Σε | 25 kA | 25 kA | 25 kA |
| Μέγ. ρεύμα εκφόρτισης (8/20μs) | Imax | 100kA | 100kA | 100kA |
| Quantity of electric charge | Q | 12.5As | 12.5As | 12.5As |
| Specific energy | W/R | 156kJ/Ω | 156kJ/Ω | 156kJ/Ω |
| Επίπεδο προστασίας τάσης | Επάνω | ≤1.5kV | ≤1.5kV | ≤1.5kV |
| Short-circuit current rating a.c. | Isccr | 25kA rms | 25kA rms | 25kA rms |
| Max. backup fuse | 315A gG | 315A gG | 315A gG | |
| Temporary overvoltage TOV-withstand | UT | 230V/120min. | 440V/120min. | 580V/120min. |
| Χρόνος απόκρισης | tA | ≤100ns | ≤100ns | ≤100ns |
| Εύρος θερμοκρασίας λειτουργίας | Tu | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ |
| Operating state/fault indication | green/red | green/red | green/red | |
| Εμβαδόν διατομής (ελάχ.) | 4mm² | 4mm² | 4mm² | |
| Εμβαδόν διατομής (Μέγ.) | 35 mm² | 35 mm² | 35 mm² | |
| Για τοποθέτηση σε | Ράγα Din 35mm | |||
| Υλικό περιβλήματος | Θερμοπλαστικό UL94-V0 | |||
| Βαθμός προστασίας | IP20 | IP20 | IP20 | |
| Order Code | B17126 | B17139 | B17152 | |
| Order Code (With remote signaling) | B17127 | B17140 | B17153 | |
Χαρακτηριστικά:
BR-25GR 1P can be assembed to form 2P, 3P and 4P. BR-25GR 1P assembled with BR-50NPE can form BR-25GR 1P+N and if assembled with BR-100NPE can form BR-25GR 3P+N.
High energy surge protection.
Failure detection indicator.
Maximum continuous operating voltage Uc: 150VAC, 275VAC, 350VAC.
Impact current limp(10/350μs) : 25kA
Nominal discharge current In(8/20μs): 25kA
Protection level Up: 1.5kV
Flame retardant plastic are adopted.
Standard modular installation.
Easy installation, directly installed in the standard 35mm rail profiles.
Use:
Suitable for maximum protection of sensitive devices in harsh environments.
It is used at the interface of LPZOA or LPZOB and LPZ1.
It is mainly used for the first stage of surge protection in AC distribution system.
Used to protect electrical and electronic equipment from induced voltages, operating transients and overvoltages.
Widely used in communication equipment, traffic, industrial control and other fields of power protection.
Περισσότερες πληροφορίες ή προσωπική διαβούλευση; Τα προϊόντα και η τεχνογνωσία μας υπάρχουν για να δώσουν λύσεις.
Optimized by Seraphinite Accelerator
