...

BR-20 1+1 Type 2 20kA Προστατευτική Συσκευή υπέρτασης για TT και TNS

Λάβετε μια προσφορά
Περιγραφή

Χαρακτηριστικά προϊόντος:

Προσδιορισμός BR-20 150 1+1 BR-20 275 1+1 BR-20 320 1+1 BR-20 385 1+1 BR-20 440 1+1
SPD classification according to EN61643-11 Τύπος 2 Τύπος 2 Τύπος 2 Τύπος 2 Τύπος 2
SPD classification according to IEC61643-11 Class II Class II Class II Class II Class II
Max. continuous operating a.c. voltage(L-N) Uc 150V 275V 320V 385V 440V
Max. continuous operating a.c. voltage(N-PE) Uc 255 V 255 V 255 V 255 V 255 V
Ονομαστικό ρεύμα εκφόρτισης (8/20μs) Σε 10kA 10kA 10kA 10kA 10kA
Μέγ. ρεύμα εκφόρτισης (8/20μs) Imax 20 kA 20 kA 20 kA 20 kA 20 kA
Voltage protection level (L-N) Επάνω ≤0.8kV ≤1.3kV ≤1.5kV ≤1.8kV ≤2.0kV
Voltage protection level 5kA (L-N) Επάνω ≤0.6kV ≤1kV ≤1.2kV ≤1.3kV ≤1.5kV
Voltage protection level (N-PE) Επάνω ≤1.5kV ≤1.5kV ≤1.5kV ≤1.5kV ≤1.5kV
Max. backup fuse 63A gG 63A gG 63A gG 63A gG 63A gG
Short-circuit withstand capacity Isccr 25 kA 25 kA 25 kA 25 kA 25 kA
Temporary overvoltage TOV-withstand (L-N) UT 180V/5sec. 335V/5sec. 400V/5sec. 500V/5sec. 580V/5sec.
Temporary overvoltage TOV-safe failure(L-N) UT 230V/120min. 440V/120min. 520V/120min. 650V/120min. 765V/120min.
Temporary overvoltage TOV-withstand(N-PE) UT 1200V/200ms 1200V/200ms 1200V/200ms 1200V/200ms 1200V/200ms
Response time (L-N) tA ≤25ns ≤25ns ≤25ns ≤25ns ≤25ns
Response time (N-PE) tA ≤100ns ≤100ns ≤100ns ≤100ns ≤100ns
Εύρος θερμοκρασίας λειτουργίας Tu -40℃-80℃ -40℃-80℃ -40℃-80℃ -40℃-80℃ -40℃-80℃
Operating state/fault indication green/red green/red green/red green/red green/red
Εμβαδόν διατομής (ελάχ.) 4mm² 4mm² 4mm² 4mm² 4mm²
Εμβαδόν διατομής (Μέγ.) 35 mm² 35 mm² 35 mm² 35 mm² 35 mm²
Για τοποθέτηση σε Ράγα Din 35mm
Υλικό περιβλήματος Thermoplastic   UL94-V0
Βαθμός προστασίας IP20 IP20 IP20 IP20 IP20
Order Code B18751 B18753 B18755 B18757 B18759
Order Code (With remote signaling) B18752 B18754 B18756 B18758 B18760

Χαρακτηριστικά:

20kA Class C for 3 Phase Supply.

It is compact devices designed to protect single-phase+neutral networks at the main switchboard.

The product is complying with the standards: EN 61643-11, CEI 61643-11, UL1449 ed. 4 compliance.

The protection circuitry is based on high energy varistor with thermal disconnection devices.

Easy to operate.

There is an indicator on the cartridges to signal failure mode.

Long service life.

The BR-20 is DIN rail mounted and features replaceable modules for the safest and easiest installation and maintenance.

Excellent functionality

Consistent plug ability(even for N/PE spark gap)

BR-20 series are designed to protect against lighting surge voltages. These units must be installed in parallel on the AC networks to be protected and provide common and differential modes protection.

Thermal disconnect device for each individual connector

Surge Protection Device / Arrester are for protection against switching surges.

With or without floating remote indication contact

Time of response<25ns.

The color of the visible window shows operating status, green means normal, red means abnormal.

Εφαρμογή:

These devices protect low-voltage consumer systems from over voltages of all types.

Protection of terminal devices.

For using in the zones concept at boundary 1-2.

Used for protection against electrical transients.

 

ΕΙΜΑΣΤΕ ΕΔΩ ΓΙΑ ΝΑ ΣΑΣ ΥΠΟΣΤΗΡΙΞΟΥΜΕ!

Περισσότερες πληροφορίες ή προσωπική διαβούλευση; Τα προϊόντα και η τεχνογνωσία μας υπάρχουν για να δώσουν λύσεις.

ΣΧΕΤΙΚΑ ΠΡΟΪΟΝΤΑ
ΣΧΕΤΙΚΑ ΝΕΑ
ΜΠΟΡΕΙ ΕΠΙΣΗΣ ΝΑ ΘΕΛΕΤΕ ΝΑ ΔΕΙΤΕ
ΑΠΟΚΤΗΣΤΕ ΤΗΝ ΠΡΟΣΤΑΣΙΑ ΑΠΟ ΤΥΠΟΥΣ
ΛΥΣΗ ΣΗΜΕΡΑ!
εικόνισμα
εικόνισμα
Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.