{"id":840,"date":"2023-12-18T15:04:36","date_gmt":"2023-12-18T07:04:36","guid":{"rendered":"https:\/\/www.britecelectric.com\/?post_type=blog&p=840"},"modified":"2024-09-05T16:32:14","modified_gmt":"2024-09-05T08:32:14","slug":"standards-related-to-surge-protection-devices","status":"publish","type":"blog","link":"https:\/\/www.britecelectric.com\/da\/blog\/standards-related-to-surge-protection-devices\/","title":{"rendered":"Standarder relateret til oversp\u00e6ndingsbeskyttelsesanordninger"},"content":{"rendered":"IEC\/EN 61643-11:2011\u00a0<\/strong>\r\nLavsp\u00e6ndingsoversp\u00e6ndingsbeskyttende enheder - Del 11: Oversp\u00e6ndingsbeskyttelsesanordninger forbundet til lavsp\u00e6ndingsstr\u00f8msystemer - Krav og testmetoder<\/strong>\r\n\r\nIEC 61643-11:2011 g\u00e6lder for enheder til oversp\u00e6ndingsbeskyttelse mod indirekte og direkte p\u00e5virkninger af lyn eller andre transiente oversp\u00e6ndinger. Disse enheder er pakket til at blive tilsluttet til 50\/60 Hz a.c. str\u00f8mkredsl\u00f8b og udstyr klassificeret op til 1 000 V r.m.s. Ydeevnekarakteristika, standardmetoder til test og vurderinger er etableret. Disse enheder indeholder mindst \u00e9n ikke-line\u00e6r komponent og er beregnet til at begr\u00e6nse oversp\u00e6ndingssp\u00e6ndinger og aflede oversp\u00e6ndingsstr\u00f8mme. Denne f\u00f8rste udgave af IEC61643-11 annullerer og erstatter anden udgave af IEC 61643-1 udgivet i 2005. De vigtigste \u00e6ndringer i forhold til anden udgave af IEC 61643-1 er den fuldst\u00e6ndige omstrukturering og forbedring af testprocedurerne og testsekvenserne.\r\n\r\nIEC 61643-21:2000\/AMD2:2012\u00a0<\/strong>\r\nLavsp\u00e6ndingsoversp\u00e6ndingsbeskyttelsesanordninger - Del 21: Oversp\u00e6ndingsbeskyttelsesanordninger forbundet til telekommunikations- og signalnetv\u00e6rk - Ydelseskrav og testmetoder<\/strong>\r\n\r\nIEC 61643-12:2020\u00a0<\/strong>\r\nLavsp\u00e6ndingsoversp\u00e6ndingsbeskyttelsesanordninger - Del 12: Oversp\u00e6ndingsbeskyttelsesanordninger forbundet til lavsp\u00e6ndingsstr\u00f8msystemer - Udv\u00e6lgelses- og anvendelsesprincipper<\/strong>\r\n\r\nIEC 61643-12:2020 describes the principles for the selection, operation, location and coordination of SPDs to be connected to 50\/60 Hz AC power circuits, and equipment rated up to 1 000 V RMS. These devices contain at least one non-linear component and are intended to limit surge voltages and divert surge currents.\r\nNOTE 1 Additional requirements for special applications are also applicable, If required.\r\nNOTE 2 IEC 60364 and IEC 62305-4 are also applicable.\r\nNOTE 3 This standard deal only with SPDs and not with surge protection components\r\n\r\nIEC 61643-22:2015\u00a0<\/strong>\r\nLavsp\u00e6ndingsoversp\u00e6ndingsbeskyttelsesanordninger - Del 22: Oversp\u00e6ndingsbeskyttelsesanordninger forbundet til telekommunikations- og signalnetv\u00e6rk - Udv\u00e6lgelses- og anvendelsesprincipper<\/strong>\r\n\r\nIEC 61643-22:2015 describes the principles for the selection, operation, location and coordination of SPDs connected to telecommunication and signalling networks with nominal system voltages up to 1 000 V r.m.s. a.c. and 1 500 V d.c. This standard also addresses SPDs that incorporate protection for signalling lines and power lines in the same enclosure (so called multiservice SPDs). This second edition cancels and replaces the first edition published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:\r\n\u2013 Update the use of multiservice SPDs (Article 8);\r\n\u2013 Comparison between SPD classification of IEC 61643-11 and IEC 61643-21 (7.3.3);\r\n\u2013 Consideration of new transmission systems as PoE (Annex F);\r\n\u2013 EMC requirements of SPDs (Annex G);\r\n\u2013 Maintenance cycles of SPDs (Annex I). Keywords: SPD, surge protective devices\r\n\r\nIEC 61643-31:2018\u00a0<\/strong>\r\nLavsp\u00e6ndingsoversp\u00e6ndingsbeskyttelsesanordninger - Del 31: Krav og testmetoder til SPD'er til fotovoltaiske installationer<\/strong>\r\n\r\nIEC 61643-31:2018 g\u00e6lder for oversp\u00e6ndingsbeskyttelsesanordninger (SPD'er), beregnet til oversp\u00e6ndingsbeskyttelse mod indirekte og direkte p\u00e5virkninger af lyn eller andre forbig\u00e5ende oversp\u00e6ndinger. Disse enheder er designet til at blive tilsluttet DC-siden af \u200b\u200bfotovoltaiske installationer, der er klassificeret op til 1 500 V DC. Disse enheder indeholder mindst \u00e9n ikke-line\u00e6r komponent og er beregnet til at begr\u00e6nse oversp\u00e6ndingssp\u00e6ndinger og aflede oversp\u00e6ndingsstr\u00f8mme. Ydelsesegenskaber, sikkerhedskrav, standardmetoder til test ogvurderinger etableres. SPD'er, der overholder denne standard, er udelukkende beregnet til at blive installeret p\u00e5 DC-siden af \u200b\u200bfotovoltaiske generatorer og DC-siden af \u200b\u200binvertere. SPD'er for solcelleanl\u00e6g med energilagring (f.eks. batterier, kondensatorbanker) er ikke omfattet. SPD'er med separate input- og outputterminaler, der indeholder specifik serieimpedans mellem disse terminal(er) (s\u00e5kaldte to-ports SPD'er i henhold til IEC 61643-11:2011) er ikke d\u00e6kket. SPD'er, der er i overensstemmelse med denne standard, er designet tilv\u00e6re permanent tilsluttet, hvor til- og frakobling af faste SPD'er kun kan ske ved brug af et v\u00e6rkt\u00f8j. Denne standard g\u00e6lder ikke for b\u00e6rbare SPD'er.\r\n\r\nIEC 61643-32:2017\u00a0<\/strong>\r\nLavsp\u00e6ndingsoversp\u00e6ndingsbeskyttelsesanordninger - Del 32: Oversp\u00e6ndingsbeskyttelsesanordninger, der er tilsluttet DC. side af solcelleanl\u00e6g \u2013 Udv\u00e6lgelses- og anvendelsesprincipper<\/strong>\r\n\r\nIEC 61643-32:2017 beskriver principperne for udv\u00e6lgelse, installation og koordinering af SPD'er beregnet til brug i fotovoltaiske (PV) systemer op til 1 500 V DC og for AC-siden af \u200b\u200bPV-systemet op til 1 000 V rms 50\/60 Hz. Den solcelleinstallation str\u00e6kker sig fra et PV-panel eller et s\u00e6t af sammenkoblede PV-moduler til at inkludere de tilh\u00f8rende kabler og beskyttelsesanordninger og inverteren op til tilslutningspunktet i fordelingstavlen eller forsyningsforsyningspunktet. Denne del af IEC 61643overvejer SPD'er, der bruges p\u00e5 forskellige steder og i forskellige slags PV-systemer: PV-systemer placeret p\u00e5 toppen af \u200b\u200ben bygning. PV-systemer placeret p\u00e5 jorden som frifeltskraftv\u00e6rker karakteriseret ved multiple jording og et masket jordingssystem. Udtrykket PV-installation bruges til at henvise til begge typer PV-systemer. Udtrykket PV-kraftv\u00e6rk bruges kun om udvidede frifelts flerjordede str\u00f8msystemer placeret p\u00e5 jorden. Til PV-installationer inklusive batterier yderligere kravkan v\u00e6re n\u00f8dvendigt.\r\n\r\nIEC 62561-1:2017 RLV\u00a0<\/strong>\r\nRedline version<\/strong>\r\nLynbeskyttelsessystemkomponenter (LPSC) \u2013 Del 1: Krav til tilslutningskomponenter<\/strong>\r\n\r\nIEC 62561-1:2017 RLV contains both the official IEC International Standard and its Redline version. The Redline version is not an official document, it is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.\r\n\r\nIEC 62561-1:2017 specifies the requirements and tests for metallic connection components that form part of a lightning protection system (LPS). Typically, these can be connectors, clamps, bonding and bridging components, expansion pieces and test joints.\r\nFor the purposes of this document the following connection types are considered as connection components: exothermic, brazing, welding, clamping, crimping, seaming, screwing or bolting. Testing of components for an explosive atmosphere is not covered by this document.\r\nThis second edition cancels and replaces the first edition, published in 2012. This edition constitutes a technical revision.\r\nThis edition includes the following significant technical changes with respect to the previous edition:\r\na. classification of connection components in permanent and non-permanent connection;\r\nb. requirements and corresponding tests for permanent connection components such as exothermic, brazing, welding, crimping, seaming;\r\nc. flow chart of tests for connection components.","protected":false},"featured_media":841,"parent":0,"menu_order":157,"template":"","meta":{"_acf_changed":false},"blog_category":[8],"class_list":["post-840","blog","type-blog","status-publish","has-post-thumbnail","hentry","blog_category-company-news"],"acf":{"des":"Low-voltage surge protective devices\u2013Part11: Surge protective devices connected to low-voltage power systems\u2013Requirements and test methods","txt":"IEC\/EN 61643-11:2011\u00a0<\/strong>\r\nLow-voltage surge protective devices\u2013Part11: Surge protective devices connected to low-voltage power systems\u2013Requirements and test methods<\/strong>\r\n\r\nIEC 61643-11:2011 is applicable to devices for surge protection against indirect and direct effects of lightning or other transient overvoltages. These devices are packaged to be connected to 50\/60 Hz a.c. power circuits, and equipment rated up to 1 000 V r.m.s. Performance characteristics, standard methods for testing and ratings are established. These devices contain at least one nonlinear component and are intended to limit surge voltages and divert surge currents. This first edition of IEC 61643-11 cancels and replaces the second edition of IEC 61643-1 published in 2005. The main changes with respect of the second edition of IEC 61643-1 are the complete restructuring and improvement of the test procedures and test sequences.\r\n\r\nIEC 61643-21:2000\/AMD2:2012\u00a0<\/strong>\r\nLow voltage surge protective devices \u2013 Part 21: Surge protective devices connected to telecommunications and signalling networks \u2013 Performance requirements and testing methods<\/strong>\r\n\r\nIEC 61643-12:2020\u00a0<\/strong>\r\nLow-voltage surge protective devices \u2013 Part 12: Surge protective devices connected to low-voltage power systems \u2013 Selection and application principles<\/strong>\r\n\r\nIEC 61643-12:2020 describes the principles for the selection, operation, location and coordination of SPDs to be connected to 50\/60 Hz AC power circuits, and equipment rated up to 1 000 V RMS. These devices contain at least one non-linear component and are intended to limit surge voltages and divert surge currents.\r\nNOTE 1 Additional requirements for special applications are also applicable, If required.\r\nNOTE 2 IEC 60364 and IEC 62305-4 are also applicable.\r\nNOTE 3 This standard deal only with SPDs and not with surge protection components\r\n\r\nIEC 61643-22:2015\u00a0<\/strong>\r\nLow-voltage surge protective devices \u2013 Part 22: Surge protective devices connected to telecommunications and signalling networks \u2013 Selection and application principles<\/strong>\r\n\r\nIEC 61643-22:2015 describes the principles for the selection, operation, location and coordination of SPDs connected to telecommunication and signalling networks with nominal system voltages up to 1 000 V r.m.s. a.c. and 1 500 V d.c. This standard also addresses SPDs that incorporate protection for signalling lines and power lines in the same enclosure (so called multiservice SPDs). This second edition cancels and replaces the first edition published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:\r\n\u2013 Update the use of multiservice SPDs (Article 8);\r\n\u2013 Comparison between SPD classification of IEC 61643-11 and IEC 61643-21 (7.3.3);\r\n\u2013 Consideration of new transmission systems as PoE (Annex F);\r\n\u2013 EMC requirements of SPDs (Annex G);\r\n\u2013 Maintenance cycles of SPDs (Annex I). Keywords: SPD, surge protective devices\r\n\r\nIEC 61643-31:2018\u00a0<\/strong>\r\nLow-voltage surge protective devices \u2013 Part 31: Requirements and test methods for SPDs for photovoltaic installations<\/strong>\r\n\r\nIEC 61643-31:2018 is applicable to Surge Protective Devices (SPDs), intended for surge protection against indirect and direct effects of lightning or other transient overvoltages. These devices are designed to be connected to the DC side of photovoltaic installations rated up to 1 500 V DC. These devices contain at least one non-linear component and are intended to limit surge voltages and divert surge currents. Performance characteristics, safety requirements, standard methods for testing and ratings are established.\u00a0 SPDs complying with this standard are exclusively dedicated to be installed on the DC side of photovoltaic generators and the DC side of inverters. SPDs for PV systems with energy storage (e.g. batteries, capacitor banks) are not covered. SPDs with separate input and output terminals that contain specific series impedance between these terminal(s) (so called two-port SPDs according to IEC 61643-11:2011) are not covered. SPDs compliant with this standard are designed to be permanently connected where connection and disconnection of fixed SPDs can only be done using a tool. This standard does not apply to portable SPDs.\r\n\r\nIEC 61643-32:2017\u00a0<\/strong>\r\nLow-voltage surge protective devices \u2013 Part 32: Surge protective devices connected to the d.c. side of photovoltaic installations \u2013 Selection and application principles<\/strong>\r\n\r\nIEC 61643-32:2017 describes the principles for selection, installation and coordination of SPDs intended for use in Photovoltaic (PV) systems up to 1 500 V DC and for the AC side of the PV system rated up to 1 000 V rms 50\/60 Hz. The photovoltaic installation extends from a PV array or a set of interconnected PV-modules to include the associated cabling and protective devices and the inverter up to the connection point in the distribution board or the utility supply point. This part of IEC 61643 considers SPDs used in different locations and in different kinds of PV systems:PV systems located on the top of a building. PV systems located on the ground like free field power plants characterized by multiple earthing and a meshed earthing system. The term PV installation is used to refer to both kinds of PV systems. The term PV power plant is only used for extended free-field multi-earthed power systems located on the ground. For PV installations including batteries additional requirements may be necessary.\r\n\r\nIEC 62561-1:2017 RLV\u00a0<\/strong>\r\nRedline version<\/strong>\r\nLightning protection system components (LPSC) \u2013 Part 1: Requirements for connection components<\/strong>\r\n\r\nIEC 62561-1:2017 RLV contains both the official IEC International Standard and its Redline version. The Redline version is not an official document, it is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.\r\n\r\nIEC 62561-1:2017 specifies the requirements and tests for metallic connection components that form part of a lightning protection system (LPS). Typically, these can be connectors, clamps, bonding and bridging components, expansion pieces and test joints.\r\nFor the purposes of this document the following connection types are considered as connection components: exothermic, brazing, welding, clamping, crimping, seaming, screwing or bolting. Testing of components for an explosive atmosphere is not covered by this document.\r\nThis second edition cancels and replaces the first edition, published in 2012. This edition constitutes a technical revision.\r\nThis edition includes the following significant technical changes with respect to the previous edition:\r\na. classification of connection components in permanent and non-permanent connection;\r\nb. requirements and corresponding tests for permanent connection components such as exothermic, brazing, welding, crimping, seaming;\r\nc. flow chart of tests for connection components."},"_links":{"self":[{"href":"https:\/\/www.britecelectric.com\/da\/wp-json\/wp\/v2\/blog\/840","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.britecelectric.com\/da\/wp-json\/wp\/v2\/blog"}],"about":[{"href":"https:\/\/www.britecelectric.com\/da\/wp-json\/wp\/v2\/types\/blog"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.britecelectric.com\/da\/wp-json\/wp\/v2\/media\/841"}],"wp:attachment":[{"href":"https:\/\/www.britecelectric.com\/da\/wp-json\/wp\/v2\/media?parent=840"}],"wp:term":[{"taxonomy":"blog_category","embeddable":true,"href":"https:\/\/www.britecelectric.com\/da\/wp-json\/wp\/v2\/blog_category?post=840"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}