خصائص المنتج:
| مواصفة | BRPV3-1000-20 | |
| SPD classification according to EN61643-31 / IEC61643-31 | Type 1 + Type 2 / Class I + Class II | |
| الأعلى. التشغيل المستمر العاصمة الجهد االكهربى | Ucpv | 1200V |
| تيار نبضي البرق (10/350 ميكروثانية) | Iimp | 20 كيلو أمبير |
| تيار التفريغ الاسمي (8/20μs) | في | 25 كيلو أمبير |
| الأعلى. تيار التفريغ (8/20μs) | ايماكس | 80kA |
| Voltage protection level [(DC+/DC-)→PE] | أعلى | ≤3.8kV |
| وقت الاستجابة | تا | ≥25ns |
| نطاق درجة حرارة التشغيل | تو | -40 درجة مئوية -80 درجة مئوية |
| حالة التشغيل/مؤشر الخطأ | green / red | |
| مساحة المقطع العرضي (الحد الأدنى) | 4 مم² | |
| مساحة المقطع العرضي (الحد الأقصى) | 35 ملم² | |
| للتثبيت على | 35 ملم دين السكك الحديدية | |
| مادة الضميمة | لدن بالحرارة UL94-V0 | |
| درجة الحماية | IP20 | |
| رمز الطلب | B18094 | |
| Order code (with remote signal) | B18095 |
سمات:
Status indication.
Ucpv 1200V can be achieved.
Category: Class I + Class II / Type 1 + Type 2.
Protection modes: (+) → PE, (-) → PE, (+) → (-).
Location of use: Photovoltaic systems – PV module side.
Conform to IEC61643-31 and EN61643-31.
طلب:
Surge protection device for the protection of photovoltaic systems from direct and indirect lightning discharge.
For photovoltaic systems on/on buildings with external lightning protection
Available for photovoltaic applications with a generator voltage of up to 1200 V.
Available as type 1 and type 2 combined lightning current and surge arresters as well as type 2 only surge arrester protective devices.
Installation instruction:
These units must be installed in parallel on the DC networks to be protected and provide common mode protection. These protectors are recommended when a direct lightning strike is possible on the installation.
DC surge arrester are designed to protect equipment connected to DC power supplies from lightning surges.
This dc surge protection is specially designed for photo-voltaic applications.
مزيد من المعلومات أو استشارة شخصية؟ منتجاتنا وخبرتنا هناك لتقديم الحلول.